2006 Honda Accord Lx on 2040-cars

Auto blog

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.

Honda recalls 2016 Civic 2.0-liter engine for piston issue

The Basics: Honda will recall 42,129 examples of the 2016 Honda Civic sedan with the 2.0-liter four-cylinder engine in the US. These models have build dates between September 22, 2015, and February 3, 2016. The issue does not affect the Civic Coupe. The Problem: The pistons might not have a wrist pin circlip or the part's installation could be incorrect. This problem could cause the engine to seize, leading to engine damage and an increased risk of fire or a crash. Injuries/Deaths: There are no deaths, but there was an unconfirmed report of a minor injury that didn't require medical attention, according to Honda. There was also a report of one engine fire, which was separate from the minor injury. The Fix: Dealers will inspect the engines and replace any damaged parts as necessary. If You Own One: Honda won't have the parts ready until this summer. Owners will receive initial notification about the recall in March, and they'll get a second letter when the components are ready. More Information: Honda already issued a stop sale on the 2016 Civic Sedan equipped with the 2.0-liter engine due to this problem. RECALL Subject : Piston Wrist Pin Circlips may not be Secured Report Receipt Date: FEB 09, 2016 NHTSA Campaign Number: 16V074000 Component(s): ENGINE AND ENGINE COOLING Potential Number of Units Affected: 42,129 All Products Associated with this Recall close Vehicle Make Model Model Year(s) HONDA CIVIC 2016 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2016 Civic vehicles manufactured September 22, 2015, to February 3, 2016 and equipped with 2.0L engines. The affected vehicles have engines with piston assemblies that may have been manufactured without a piston wrist pin circlip or with an incorrectly installed piston wrist pin circlip. CONSEQUENCE: If a circlip is missing or incorrectly installed, the piston wrist pin may not be secure and may drift and damage the engine cylinder causing the engine to seize, and increasing the risk of a crash or a fire. REMEDY: Honda will notify owners, and dealers will inspect and replace the piston assemblies, as necessary, free of charge. Parts are expected to be available in the Summer of 2016. Owners will be mailed an interim notification beginning March 15, 2016, and will be mailed a second notice when parts are available. Owners may contact Honda customer service at 1-800-999-1009. Honda's number for this recall is JX9.

Autoblog Podcast #317

Mitsubishi Mirage, Toyota thinks of beefing up US production, Marchionne on Alfa, Dart and minivans, Ford Atlas concept, Honda Gear concept
Episode #317 of the Autoblog Podcast is here, and this week, Dan Roth, Jeff Ross and Michael Harley bookend the other podcast topics with a pair from the Montreal Auto Show, the Mitsubishi Mirage and Honda Gear concept, and in between we talk about Toyota building all its US-market cars stateside, Hyundai building a Nurburgring test facility, Sergio Marchionne's latest words about Alfa Romeo, Dodge Dart powertrains and the future of Chrysler vans. Some chatter about the Ford Atlas concept finishes up the meat of the 'cast and then we wrap with your questions. For those of you who hung with us live on our UStream channel, thanks for taking the time. Keep reading for our Q&A module for you to scroll through and follow along, too. Thanks for listening!
Autoblog Podcast #317: