2002 Honda Accord 4 Door Sedan V Tech Engine Fast Automatic on 2040-cars

Auto blog

2019 Subaru Forester vs. 2020 Honda CR-V Car Seat Test

We've had our long-term 2019 Subaru Forester Touring for some time now, and I've had my large son's car seat in it — and out of it, and back in it — a fair number of times. Installing a car seat over and over is a pain, but the Forester is actually a pretty good car for it. The rear seat is roomy, the door opening is large and the car seat is generally easy to install. For a few short days, though, I also had a 2020 Honda CR-V Hybrid in the driveway alongside the Subaru. Mostly stuck at home in quarantine, I wasn't getting a lot of chances to drive the two cars back to back, but comparing something like a child's car seat in each car is easy enough without unnecessary trips and potential exposure to coronavirus. So, with my son along for moral support, I lugged his car seat out of the garage and got to strappin'.  In terms of backseat roominess, the Forester and CR-V are competitive. On paper, they're very close, with the Forester offering 39.4 inches of rear legroom and 39.6 inches of headroom, and the CR-V providing 40.4 inches of legroom and 39.2 inches of headroom (the fact that I tested a Hybrid makes no difference). For each, I moved the front passenger seat forward to a reasonably comfortable seating position, keeping a sizeable gap between my knees and the dashboards, and eyed them up. They look damn near the same, each offering lots more space in the second row than my wife's 2013 Mercedes-Benz GLK that I'm usually putting the car seat into. Even the openings are close in size and shape, perhaps with the Forester getting a slight advantage in ingress/egress for one's feet, which matters little when installing the boy's Chair Force One (officially a Britax Frontier ClickTight). First, I tried the car seat in the Subaru. It's really easy. There's no angling the seat to wedge it in the door. Just walk up and plop it down. I thought for sure the Forester would take the win here, but when I went to put it in the CR-V, it was equally simple. Once installed, both still offer plenty of room behind the front seat for a child to swing their legs around without kicking the seat back. With just one child, we often find ourselves putting one of the rear seats down to accommodate more items, like when we're hauling gear up to our cottage for a vacation — or just going to Costco. If we're picking a side of the car, we usually put our boy on the passenger side.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.