2014 Honda Accord Touring on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.