2014 Honda Accord Sport on 2040-cars

Auto blog

2015 Honda Civic Type R prototype

With a name like Earth Dreams, you'd be forgiven for assuming that Honda's new family of turbocharged VTEC engines is more about environmental credentials than performance. And to a large degree they are - particularly in 1.0- and 1.5-liter forms. But the 2.0 is another beast altogether.
Thanks to a high-output turbocharger, direct injection, a high-performance cooling system and, of course, variable valve timing, Honda's new 2.0-liter four produces upwards of 280 horsepower while still complying with upcoming Euro 6 emissions standards. Although actual output has yet to be confirmed, that preliminary figure already compares favorably with the Ford Focus ST (252 hp) and Mazdaspeed3 (274 hp) and rests comfortably in between the Volkswagen GTI (270 hp) and Golf R (296 hp).
Although Honda has already shoehorned the smaller 1.5-liter turbo four and 1.0-liter turbo three-cylinder engines into an Acura ILX and another Civic hatchback, the home it gave the 2.0 betrays more than an engine swap. What you see here is essentially the next Civic Type R, following a long line of Honda hot hatches. With this latest model, the Japanese automaker is targeting the front-drive lap record at the Nürburgring that belongs to the Renaultsport Megane Trophy and before that, to the lightweight Megane R26.R. A tall order, to be sure, so we headed to Honda's R&D center in Tochigi, Japan, to take it out for a ride.

Honda and Acura recall 124,077 vehicles due to potential brake failure

Honda and Acura are recalling 124,077 total vehicles across numerous model lines due to a part in the brake system that was potentially improperly assembled, which could ultimately lead to brake failure. The models affected include the 2020-2021 Honda Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot and the 2020 Acura MDX. As for the issue itself, Honda says the brake master cylinder “may have been improperly fastened to the brake booster assembly during production.” Specifically, the tie rod fastener is the problem point. Honda says that if it was improperly assembled, that could result in loose or missing tie rod nuts. If this is the case, when you hit the brakes, a bending load can be placed on the brake booster tie rod studs, which could in turn cause the tie rod studs to break. This then allows the brake master cylinder to separate from the brake booster, which Honda says could result in diminished or lost brake function. Honda says it received a report of brake failure on a 2021 Pilot last year, which prompted the companyÂ’s investigation. There are no crashes, injuries or deaths related to this issue, according to Honda, but it has received two related warranty claims since September 2022. Owner notifications are scheduled to begin on August 7 this year. Honda says it will inspect and replace any missing nuts, and if any brake booster assembly components are damaged, those will be replaced, too. Related video: Recalls Acura Honda Truck Crossover Hatchback SUV Sedan

Honda recalls 2.7 million vehicles for new air bag inflator defect

WASHINGTON — Honda said on Tuesday it will recall 2.7 million older U.S. vehicles in North America for potentially defective air bag inflators. The defect involves a different type of Takata inflator than those that have prompted the largest-ever auto safety recalls worldwide covering more than 42 million U.S. vehicles by 19 automakers with Takata air bag inflators. The new recall covers Honda and Acura automobiles from the 1996 through 2003 model years. Honda said it is aware of one field rupture of an inflator in the new recall campaign — a 2012 crash in Texas that resulted in an injury — and two in junkyards in Japan. The campaign covers 2.4 million U.S. vehicles and 300,000 in Canada, Honda said, adding that it has not determined recall numbers for other countries. Takata issued a new defect notice in November for inflators from four automakers, including Honda. Honda said all three vehicles "potentially were exposed to unusually high amounts of moisture prior to the rupture events." Honda said the recalls cover driver front airbag inflators manufactured with non-azide propellant and said "all inspections and repairs will begin in approximately one year, as replacement parts from alternative suppliers are not yet available." Honda said it "regrets any inconvenience or distress that this situation may cause to our customers as we seek to resolve this situation. Honda believes that the risk of improper airbag deployment in its vehicles remains very low at this time, but we cannot absolutely guarantee the performance of any recalled part." Related Video: