Low Mileage 2004 Model All Wheel Drive Yukon Denali Xl! on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

Barrett-Jackson rundown: 2024 GMC Hummer EV, Colin Powell's Corvette and more

The echoes of the last hammer fall at Barrett-Jackson's Scottsdale Auction have disappeared into the Arizona night, as have the record crowds and the traffic jams. During the Super Saturday charity auctions, three main attractions drove onto the dais for bidding: Late U.S. Chairman of the Joint Chiefs of Staff and Secretary of State General Colin Powell’s 2015 Chevrolet Corvette Stingray, the hammer price benefitting AmericaÂ’s Promise Alliance, the nonprofit Powell founded to support kids; The first production 2024 GMC Hummer EV SUV Edition 1 with VIN 001, proceeds going to Tread Lightly!, which educates people on how to enjoy the outdoors in a motorized vehicle and simultaneously protect the outdoors; And the first production 2024 Ford Mustang GT Fastback VIN 001, its hammer price benefiting the Juvenile Diabetes Research Foundation. Before the Saturday showcase, charity auctions on Friday took Barrett-Jackson past a huge milestone. When an 800-horsepower 2021 Shelby Super Snake Count's Kustoms Edition hammered for $350,000 to support the veteran's charity Camp Freedom, the auction house officially surpassed the $150 million mark for charity auction proceeds. Piling on before the clock struck midnight, a 2023 Ford F-150 Lightning 4x4 Super Crew sold for $275,000, those funds donated to Fighter Country Foundation. Then came Saturday. Powell's Gunmetal Gray on black Stingray was said to be a daily driver, but with just 15,600 miles on the odometer, Powell — who died in 2021 — apparently had a very short commute. Equipped with an eight-speed automatic transmission and chrome wheels, it sold for $200,000. The first production 2024 GMC Hummer EV SUV Edition 1 ran the bidding up to $500,000. That's quite a ways down on the $2,500,000 that the bedded 2022 GMC Hummer EV Edition 1 garnered at the charity auction in 2021, and not a bad price all things considered. The owner gets the first one off the line instead of getting lost in the 90,000-order backlog, and the markup goes to a good cause instead of a flipper and eBay fees. The first production 2024 Mustang GT Fastback brought in both less and more than the Hummer EV. The Ford's hammer price came to $490,000. However, two additional philanthropic donations for this lot in the amounts of $50,000 and $25,000 took the final price to $565,000. The big movers on the day were outside the charity sphere, four cars breaking the million-dollar mark.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: