2020 Gmc Yukon Slt 4wd on 2040-cars

Auto blog

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

2023 GMC Sierra AT4X could swipe a few parts from the AT4X AEV

GM recently expanded its collaboration with American Expedition Vehicles beyond the Bison herd with the 2023 GMC Sierra AT4X AEV. This Jimmy takes matters further than the standard AT4X by increasing ground clearance, approach and departure angle, and breakover angle, improvements made possible by new stamped steel bumpers and a set of 33-inch mud-terrain tires wrapping 18-inch AEV Salta wheels. GM Authority says the AT4X AEV won't be the only Sierra to get special parts, crediting sources for the news that the standard 2023 Sierra AT4X will get some of the equipment from the special trim. According to the report, at some point for the coming model year, the off-road-focused Sierra will bolt on the AEV's stamped steel front and rear bumpers, stamped steel front skid plate, and 33-inch Goodyear mud terrains. If this is true, it's an intriguing move; the equipment list is nearly everything found on the proper AEV model. Going by that list, the only bits left off would be four additional skid plates, wheels, gloss black door handles, gloss black tailgate accent, and AEV logos. Judging from the GMC retail website, the grille that debuted on the AT4X AEV will also be on the standard AT4X.  GMC hasn't announced pricing for the 2023 range yet. The pickup will be carryover, but we would expect various well-known issues to increase the $78,300 price of the regular AT4X over the 2022 model. GMA believes "it's reasonable to assume" that a standard 2023 Sierra AT4X with some AEV parts would go up even more, whenever it hits the market — and this is on top of the Sierra's $1,500 price increase from making OnStar standard equipment. And after that, of course, the proper AT4X AEV would be more again.

2020 GMC Acadia AT4 priced just a little more than the SLT trim

Cars Direct has seen the order guide pricing the 2020 Acadia AT4 at $42,495 after destination; that means a $41,300 MSRP plus $1,195 for shipping and handling. GMC has left a lot of pricing room between the rugged, all-wheel drive AT4 and the dressed-up, top-shelf Acadia Denali with AWD, the latter costing $49,495, a $7,000 difference. The spread's blown out some by what appears to be an $800 increase for the 2020 Acadia Denali with all-wheel drive. The 2019 model costs $48,695. On the other hand, it looks like the 200 Acadia SLT trim has gone down in price. Cars Direct says that model will run $41,995, which is $300 less than the 2019 version that goes for $42,295 after destination. The new price leaves a $500 gap between the SLT-1 model with all-wheel drive and the AT4 trim, a figure that's a no-brainer to justify for any buyers trying to get a more butch curb appeal.     The Acadia AT4 package comes standard with all-wheel drive and the 3.6-liter V6 with 310 horsepower and 271 pound-feet of torque, puts black chrome on the grille, and nabs a set of exclusive 17-inch wheels on all-terrain tires. The other two engines in the lineup are a new turbocharged 2.0-liter four-cylinder with 230 horsepower and 258 pound-feet of torque, and cylinder deactivation. That motor will be the standard kit on the SLT and Denali trim levels, supplanting the 3.6-liter that's standard on the 2019 models. The entry-level engine carries over, a naturally aspirated 2.5-liter four-cylinder making 193 horsepower and 188 pound-feet of torque.