2019 Gmc Yukon Denali on 2040-cars

Auto blog

2018 GMC Sierra Denali can help you tow without breaking a sweat

Towing a trailer once meant that only those who possessed certain knowledge would be able to go fishing, tow a race car or pull a camper safely. For me, it took four long years of practice working a job behind the wheel of a jacked-up Ford F-250, hauling tons upon tons of mowing equipment for my local parks department, to become proficient. Just how far things have come since then became evident after a recent trip to Utah with GMC, in which we used the half-ton Sierra Denali to tow a set of Polaris side-by-sides through the state. Modern safety technology and a suite of electronic aids make towing simple enough that anyone with a driver's license and something to haul can do it. This revelation came behind the leather-wrapped and heated steering wheel of GMC's outgoing 2018 Sierra Denali. Sitting in the plush, heated and cooled captain's chair, I could barely feel the 6,000 pounds I was towing behind me. Even GMC's smallest full-size truck engine, a 5.3-liter V8 generating 355 horsepower and 383 lb-ft of torque, felt like overkill for what used to amount to a heavy load. With Utah's pristine landscape, the plush confines of the cabin and the uneventful nature of modern towing, mile after mile just streamed by at highway speeds without incident (or excitement). When we finally reached our destination a few hours later, one of GMC's representatives who had chosen to sit in the rear of the cab asked me what I thought about the drive. I pondered for a few minutes and answered with this: "Modern pickup trucks have removed nearly every skill-based variable once associated with towing. I could drive this truck and trailer confidently with just one finger." Consider the near overabundance of towing-assistance systems in the GMC Sierra Denali that I piloted through Utah. Let's start with the most basic of towing skills — something that's now been relegated to the annals of history: reversing a pickup to meet the trailer's hitch. Once upon a time, this required knowing a truck's dimensions and understanding proximity, as well as having a keen eye, a steady foot for both the gas and the brake and the patience to get it right. Now, though, pickups such as the Sierra Denali offer customers a trailer reverse camera system that helps the driver align truck to hitch with pinpoint accuracy.

The Hummer EV Edition 1 is sold out and it'll be years before other trims arrive

When the 2022 GMC Hummer EV was revealed, GMC noted that there would be lower trims available. The company has since provided a few more details on those lower trims, which is helpful to know now that the only trim on sale next year, the Edition 1, was sold out in a scant 10 minutes. However, it's going to be a long time before they're all available.  The entry-level GMC Hummer EV is the EV2. This is the model that will start at $79,995, and unlike the Edition 1, it gets just two motors, one for each end of the truck, each with electronically locking differentials. Output is down to 625 horsepower and a torque rating of 7,400 pound-feet. Note that this and all other reported torque numbers are after the torque multiplication by the single-speed transmissions, hence the extremely high numbers. The company hasn't given torque numbers at the motors, which would be more comparable to other electric cars. Range is also reduced to 250 miles, probably due to a smaller battery pack. Fast charging is also restricted to 400-volt charging, so it won't be as fast as the higher trim models. The removable roof panels, retractable rear window, MultiPro tailgate, Super Cruise and 35-inch tires are standard. This model only gets fixed steel suspension and two-wheel steering. The EV2 will be the last of the trim levels to go on sale, with a target of spring 2024. Yes, as in 3.5 years from now.  The next level is the EV2X, which will be available a year earlier in the spring of 2023. It gets the same powertrain as the EV2, but adds 800-volt fast charging and a 300-mile range. It also gets the adaptive air suspension and four-wheel steering, plus the associated party tricks of Crab Mode and Extract Mode. This model costs $89,995. The earliest Hummer EV that isn't an Edition 1 and therefore not yet sold out will be the EV3X, the entry-level three-motor model. It goes on sale in the fall of 2022 at a price of $99,995. It's not quite as potent as the Edition 1, though, with an output of 800 horsepower and 9,500 pound-feet of torque. It also lacks the "Watts to Freedom (WTF)" launch control feature. But it does get torque-vectoring with the dual rear motors, which can also lock their speeds to be equal like with the mechanical locking differential at the front. The EV3X's range is 300 miles like the EV2X.  As for the Edition 1, it started $112,595 before it was sold out. Customers are to expect them in fall 2021.

5 reasons why GM is cutting jobs, closing plants in a healthy economy

DETROIT — Even though unemployment is low, the economy is growing and U.S. auto sales are near historic highs, General Motors is cutting thousands of jobs in a major restructuring aimed at generating cash to spend on innovation. It's the new reality for automakers that are faced with the present cost of designing gas-powered cars and trucks that appeal to buyers now while at the same time preparing for a future world of electric and autonomous vehicles. GM announced Monday that it will cut as many as 14,000 workers in North America and put five plants up for possible closure as it abandons many of its car models and restructures to focus more on autonomous and electric vehicles. The reductions could amount to as much as 8 percent of GM's global workforce of 180,000 employees. The cuts mark GM's first major downsizing since shedding thousands of jobs in the Great Recession. The company also said it will stop operating two additional factories outside North America by the end of next year. The move to make GM get leaner before the next downturn likely will be followed by Ford Motor Co., which also has struggled to keep one foot in the present and another in an ambiguous future of new mobility. Ford has been slower to react, but says it will lay off an unspecified number of white-collar workers as it exits much of the car market in favor of trucks and SUVs, some of them powered by batteries. Here's a rundown of the reasons behind the cuts: Coding, not combustion CEO Mary Barra said as cars and trucks become more complex, GM will need more computer coders but fewer engineers who work on internal combustion engines. "The vehicle has become much more software-oriented" with millions of lines of code, she said. "We still need many technical resources in the company." Shedding sedans The restructuring also reflects changing North American auto markets as manufacturers continue to shift away from cars toward SUVs and trucks. In October, almost 65 percent of new vehicles sold in the U.S. were trucks or SUVs. That figure was about 50 percent cars just five years ago. GM is shedding cars largely because it doesn't make money on them, Citi analyst Itay Michaeli wrote in a note to investors. "We estimate sedans operate at a significant loss, hence the need for classic restructuring," he wrote. The reduction includes about 8,000 white-collar employees, or 15 percent of GM's North American white-collar workforce. Some will take buyouts while others will be laid off.