2013 Gmc Yukon Slt 4x4 8-pass Htd Leather Rear Cam 30k Texas Direct Auto on 2040-cars

Auto blog

2015 Chevy Canyon, GMC Colorado to net up to 27 mpg with 4-cylinder

Before even officially going on sale to customers, the GMC Canyon and Chevrolet Colorado midsize pickup twins are already proving to be a success with dealer orders exceeding original projections. Now, there is even more good news for these siblings, with the fuel economy for their four-cylinder engines netting class-leading numbers and the 3.6-liter V6 getting segment-best payload ratings.
The 2.5-liter four-cylinder in the two trucks makes 200 horsepower and 191 pound-feet of torque, and in rear-wheel drive and six-speed manual trim it has an EPA rating of 19 mpg city, 26 mpg highway and 22 mpg combined. Opting for a two-wheel drive configuration with the six-speed automatic bumps those figures slightly to 20 mpg city, 27 mpg highway and 22 mpg combined. Finally, a four-wheel drive model with the automatic 'box carries a 19/25/21 rating. Those numbers are a tick better here and there compared to what's offered by the optional V6.
The twins' major four-cylinder, midsize pickup rivals are the Toyota Tacoma and Nissan Frontier, but they're both getting somewhat long in the tooth. To compare fuel economy and power, a two-wheel drive Tacoma with its 2.7-liter four-cylinder is rated at 159 hp and 180 lb-ft, and achieves 21/25/22 mpg. The Frontier with its 2.5-liter four-cylinder is good for 152 hp and 171 lb-ft, and carries 19/23/21 mpg figures.

Buick, GMC making OnStar Connected Services standard

The thing about the future is that so long as you're alive, you're going to get there whether you like it or not. Thanks to over-the-air connections essentially being a compulsory part of EV ownership and an increasingly important — and profitable — component of ICE ownership, it's easiest for automakers to install full-featured Internet connections in every vehicle. GM has taken the first step, a report in GM Authority saying that as of June 2, all Buick and GMC models are sold with the Onstar Connected Services plan good for three years. The OnStar site shows the Connected Vehicle tier that comes with a Wi-Fi hotspot costs $24.99 per month, which would be $900 minus a few pennies for three years. At the top end is OnStar Premium that runs about $1,800 for three years. Both include Connected Services features, yet GMA reports that depending on the vehicles, OnStar Connected Services will cost between $905 and $1,675. Only the GMC Hummer EV Edition 1 is excluded for now. GM confirmed the change to GM Authority, saying, "This offering provides our owners with a full suite of OnStar and Connected Services for three years, providing them with more time to enjoy services such as remote key fob, Wi-Fi data and OnStar safety services. By including this plan as standard equipment on the vehicle, it provides more customer value and a more seamless onboarding experience." Three trims of the GMC Sierra 1500 and two trims of the GMC Yukon and Yukon XL come in at the low end, OnStar adding $905 to their MSRPs. Almost every other vehicle gets hit with a $1,500 charge. The GMC Sierra HD Pro is the only model to charge $1,675 for it, which GMA breaks out as a "$1,500 3-year subscription and $175 OnStar & GMC Connected Services Capability." This brings up the question of the price differences; we can't tell if there's a difference in feature content between the price tiers, or why the Sierra HD gets the extra $175 fee. The automaker told GMA the upcharge will be folded into the MSRP. On the configurator for the Sierra 1500 SLE, for instance, the dialog box for three years of OnStar at $1,500 is automatically checked and can't be unchecked. The Buick configurators we tried don't mention OnStar.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.