2011 Gmc Yukon Xl 1500 Denali on 2040-cars

Auto blog

GMC Syclone spools up a storm on Jay Leno's Garage

A storm was brewing on American roads in the early 1990s. That's when Detroit's automakers were producing some of the hottest performance trucks ever devised – models like the Ford Lightning, GMC Typhoon, and its flyweight pickup sibling, the GMC Syclone. Jay Leno just happens to have one of the latter in his garage, and took it out to showcase in this latest video segment. The Syclone was an exercise in absurdity, and could not only trounce any other pickup on the road, it could outrun anything else GM made and just about anything else on the road – beating Ferraris and Porsches off the line. In a pickup, for crying out loud. The kicker is that its engine wasn't such a monster, either: under the hood sat a 4.3-liter turbocharged V6 pumping out what would seem by today's standards to be an adequate 280 horsepower and 350 pound-feet of torque. Even the smaller of the EcoBoost V6s available in today's Ford F-150 produces more than that. But in a lightweight, compact pickup, those figures were enough to propel the Syclone to 60 in 4.3 seconds and run the quarter-mile in 13.6 seconds. Long before the dune-jumping Ford F-150 SVT Raptor or even the Viper-powered Dodge Ram SRT-10, GM made fewer than 3,000 Syclones based on the compact Sonoma (sister to the Chevy S-10) and another 4,700 of the Typhoon, which was mechanically similar but more practical (albeit heavier) wagon bodywork from the Jimmy. But as Jay aptly points out, the Syclone was the one you wanted. Scope it out in the ten-minute video clip above.

2018 GMC Terrain loses the V6 and gains a diesel for an all-turbo lineup

You may have noticed that compact crossovers are kind of a big deal these days. After eight years on sale, GMC is finally getting a new version of its littlest ute, the Terrain, for 2018. And it can't arrive a moment too soon. The 2018 GMC Terrain made its debut tonight on the eve of the 2017 Detroit Auto Show. The 2018 Terrain looks to be completely new, and is now built on GM's D2XX platform. It again shares a platform and major components with the Chevrolet Equinox; like the 2018 Equinox, the Terrain will offer three engines, including two turbocharged gas four-cylinders and a turbodiesel four. The base 1.5-liter gas four makes 170 horsepower and 203 pound-feet of torque, while the 2.0-liter inline-four puts out 252 hp and 262 lb-ft. (The 2.0 basically takes the place of the 3.6-liter V6 offered in the outgoing Terrain.) GM's 1.6-liter diesel four will also be available, making 137 hp and 240 lb-ft of torque in this application. Both gas engines will be paired with nine-speed automatic transmissions, while the diesel gets a six-speed auto. No fuel-economy claims have been made, but we expect the new models to outdo the current versions, with the diesel reaching around 40 mpg on the EPA highway cycle. View 14 Photos The new Terrain's design is equally fresh and does a good job of differentiating it from the related Equinox, with details very reminiscent of the new GMC Acadia. The lighting elements are even more intricate here, with LEDs used for the daytime running lights and taillamps. GMC designers gave it the floating-roof look, which is successful aside from the odd placement of a trim badge at the base of the D-pillar. Terrains will again be available in SL, SLE, SLT, and range-topping Denali trim, with the latter featuring the signature satin chrome grille, chrome accents, and monochrome paint scheme GMC uses on all of its top-trim models. The interior sees an upgrade in materials and a more-thoughtful layout, with a new version of GM's Electronic Precision Shift gear selector using buttons and switches instead of a lever to open up more space on the center console. Both front- and all-wheel-drive models get a Traction Select system that will tune the shift points and throttle points for specific driving conditions via a knob at the rear of the console. On models equipped with all-wheel drive, a front-drive mode disconnects the rear axle to improve fuel economy.

GM extends production cuts, affects Cadillacs, Camaro and Acadia

General Motors is extending production cuts at some of its North America factories due to a chip shortage that has roiled the global automotive industry, the U.S. carmaker said on Thursday. The move's impact has been baked into GM's prior forecast that the shortage could shave up to $2 billion off this year's profit. GM's Lansing Grand River assembly in Michigan will extend its downtime through the week of April 26. The plant makes Chevrolet Camaros and Cadillac CT4 and CT5 sedans. It has been out of action since March 15. GM's Spring Hill assembly in Tennessee will shut down for two weeks starting the week of April 12. The plant makes the Cadillac XT5, XT6 and GMC Acadia. The company said it has not taken downtime or reduced shifts at any of its more profitable full-size truck or full-size SUV plants due to the shortage. The news was first reported by CNBC. Reporting by Ankit Ajmera in Bengaluru; Editing by Maju Samuel and Sriraj Kalluvila