2009 Gmc Yukon Xl 4x4 on 2040-cars

Auto blog

2020 GMC Acadia AT4 priced just a little more than the SLT trim

Cars Direct has seen the order guide pricing the 2020 Acadia AT4 at $42,495 after destination; that means a $41,300 MSRP plus $1,195 for shipping and handling. GMC has left a lot of pricing room between the rugged, all-wheel drive AT4 and the dressed-up, top-shelf Acadia Denali with AWD, the latter costing $49,495, a $7,000 difference. The spread's blown out some by what appears to be an $800 increase for the 2020 Acadia Denali with all-wheel drive. The 2019 model costs $48,695. On the other hand, it looks like the 200 Acadia SLT trim has gone down in price. Cars Direct says that model will run $41,995, which is $300 less than the 2019 version that goes for $42,295 after destination. The new price leaves a $500 gap between the SLT-1 model with all-wheel drive and the AT4 trim, a figure that's a no-brainer to justify for any buyers trying to get a more butch curb appeal.     The Acadia AT4 package comes standard with all-wheel drive and the 3.6-liter V6 with 310 horsepower and 271 pound-feet of torque, puts black chrome on the grille, and nabs a set of exclusive 17-inch wheels on all-terrain tires. The other two engines in the lineup are a new turbocharged 2.0-liter four-cylinder with 230 horsepower and 258 pound-feet of torque, and cylinder deactivation. That motor will be the standard kit on the SLT and Denali trim levels, supplanting the 3.6-liter that's standard on the 2019 models. The entry-level engine carries over, a naturally aspirated 2.5-liter four-cylinder making 193 horsepower and 188 pound-feet of torque.

2020 GMC Sierra gets small price bumps, package discounts and tweaks

A couple of months ago we covered a brace of changes GMC made to the 2020 Sierra 1500. Those included availability of the 2.7-liter turbocharged four-cylinder with 310 horsepower and 348 pound-feet of torque, the 5.3-liter V8 getting the 10-speed automatic transmission, the CarbonPro Editions debuting for AT4 and Denali trims, and a new bed view camera. But GMC has made a few more smaller changes throughout, as GM Authority found, part of a detailed overhaul among GM's pickup lines that's already changed trim names, trim volume, and prices on the Chevrolet Canyon and GMC Colorado. We'll start with MSRP adjustments on the 2020 Sierra: 4WD drivetrains in SLT, and the AT4, and Denali trims that only come in 4WD, see a price increase of $200. There are also more MSRPs to consider this year, with a handful of new Elevation models filling price gaps.  The only changes inside are AT4-logoed all-weather floor liners that come standard for that trim, and adaptive cruise control joining the Driver Alert Package II available on the SLT, AT4, and Denali trims. Speaking of packages, the Value Packages represent truth in advertising. The new base-model Sierra Sierra Value Package costs $860 to combine the Convenience Package and Trailering Package. Those two cost $1,640 when ordered separately. Sticking with the base trim, the Chrome Exterior Package disappears because the chrome bumpers it added are now the standard finish. Black bumpers front and rear can be ordered at no charge, and the 17-inch Bright Silver painted aluminum wheels can be ordered alone. One trim up, the SLE Value Package lumps Convenience and Trailering, too, but it only costs $380, which is $15 less than the Trailering Package by itself. The Elevation Value Package gets cut by $1,330 to $585. On the AT4 trim, GMC dropped the price of the CarbonPro Package from $1,060 to $560, and the Premium Package comes down by $500 as well. The same $500 discount applies to the SLT Premium Package. The new 2.7-liter turbocharged four-cylinder is the optional engine on the base, SLE, and Elevation trims, saving $235 on the first trim and $395 on the other two compared to ordering the standard 4.3-liter EcoTec V6. Smokey Quartz Metallic exterior paint is expected to disappear come Q2. Two new wheels enter the range in the upper reaches, one being a 20-inch Carbon Grey painted rim available on the AT4 CarbonPro Edition.

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.