2007 Gmc Yukon on 2040-cars

Auto blog

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.

Junkyard Gem: 1973 GMC Sierra Grande Camper Special

Starting in the 1973 model year, General Motors introduced the "Rounded Line" family of C/K-series Chevrolet and GMC trucks, and sales of the pickup versions continued all the way through 1987. Nice examples of these trucks can sell for large money, but the junkyard teaches us that not all collectible vehicles are worth rescuing and fixing up. Here's a reinforcement of that lesson, courtesy of a first-year GMC C2500 Camper Special with the high-zoot Sierra Grande trim level, found in a self-service yard just outside of Denver, Colorado. I'm no GM truck expert, but I know enough to stay clear of the battles over what to call this pickup. Let's just say it's a three-quarter-ton, rear-wheel-drive third-gen C-Series with really cool badges. Yes, I bought this badge for my garage wall, and it was totally worth the $4.23. GM came up with the Camper Special package during the late 1960s, when removable pickup campers became popular, and for 1973 it included heavy-duty springs and a wiring harness made to plug into the connectors on slide-in truck campers. It also included woodsy-looking badges, but someone pried the ones off this truck before I could buy them. This may well have been a one-owner truck, because it still had original warranty paperwork inside. Here we see that it was purchased new on August 2, 1973 (which happens to be the day that George Brett got his very first hit in the big leagues) by a resident of Compton, California. Yes, that Compton. The build tag tells us that this Camper Special was born at the Fremont Assembly plant in California, which became the GM-Toyota NUMMI venture in 1984 and is now the Tesla Factory. I think most 1973 C/K pickups sold new in Colorado would have come from Pontiac Assembly in Michigan. There was a time, not many years ago, when a genuine 454-cubic-inch (that's 7.4 liters to those of you sweating under the oppressive weight of the French Empire's Measurement System) big-block Chevrolet engine would have been yanked out and purchased within hours of hitting the rows of a yard like this. These days, engine-swappers can get more power with less weight from any number of donor vehicles. If this engine is the original 454, it was rated at 240 horsepower and 355 pound-feet (down from 270 hp in 1972 due to emissions-related changes). This truck had a three-speed automatic transmission, like most optioned-up Detroit pickups of its era.

2019 GMC Sierra AT4 gives Raptor and Ram a new off-road rival

The 2019 GMC Sierra AT4 blends off-road hardware into a modern, thoroughly updated pickup truck that doesn't skimp on power, luxury, or safety equipment. From its higher suspension setup to its available carbon-fiber cargo bed and the new MultiPro tailgate, the 2019 Sierra AT4 is a direct shot across the bow — or cargo beds, if you prefer — of staunch rivals like the Ford F-150, Dodge Ram and Toyota Tundra. Revealed tonight in New York City, ahead of this week's New York International Auto Show, the truck may seem to be in a strange setting. Then again, with the amount of tire-swallowing potholes currently scattered around the Big Apple, a rugged truck like the Sierra AT4 could be the perfect vehicle for either off-road excursions or an especially bumpy commute. Riding two inches higher than the standard 2019 Sierra, the AT4 comes with standard features like all-wheel-drive with a two-speed transfer case, locking rear differential, Rancho monotube shock absorbers designed specifically for off-roading, along with skid plates and 18- or 20-inch alloy wheels fitted with all-terrain tires or optional, mud-loving Goodyear Wrangler Duratecs. Hill descent control and GMC's Traction Select system are also standard. The latter of these two lets the driver choose between preset drive modes, suitable for various types of terrain and weather conditions. The system then adjusts throttle response, shift points, and the electronic stability control according to each mode. Related: 2018 GMC Sierra 1500 buying guide "The 2019 Sierra AT4 is designed for the customer who wants an elevated presence on the road and the capability to venture off life's beaten path," said Duncan Aldred, vice president of Global GMC. "It's also the beginning for the AT4 brand, which will be seen on every vehicle in our lineup in the next two years." Based on the new 2019 Chevrolet Silverado, the GMC Sierra (including the AT4 model) looks to stand out from its corporate cousin in terms luxury touches, along with some subtle exterior details. For the AT4, these visible differences include a body color grill surround and bumpers. Meanwhile, the inner grille, front fog-lights and faux fender vents feature a black-chrome finish. It's not flashy, which is probably exactly what GMC wanted for its upscale truck. The standard engine is a 5.3-liter V8, though buyers can choose an optional 3.0-liter turbo-diesel inline-six or 6.2-liter V8.