2005 Used 4.8l V8 16v Automatic 4x2 Suv Premium Onstar on 2040-cars

Auto blog

2018 GMC Yukon Denali gets a sculpted new grille

More than half of all GMC Yukon and Yukon XL models sold wear top-level Denali trim. That's a profitable scenario for the automaker, so, perhaps above all else, GMC needs its premium Denali series of vehicles to continue to stand out in a line of trucks and SUVs at the dealership lot. Hence, chrome, and lots of it. But for 2018, GMC is blessing the behemoth Yukon Denali with an added dose of class with a new multi-dimensional grille. "The new grille, which is flanked by HID headlamps and LED Signature Lighting, advances the design legacy established with the very first Yukon Denali in 1999," said Matt Noone, director of Global GMC Exterior Design. In addition to a sophisticated new look, the grille adds customizable cooling capabilities to the Denali range. Active shutters open when additional cooling is needed, or close to reduce aerodynamic drag when the engine isn't too warm. Further increasing the efficiency of the big brutish 'ute is a new 10-speed automatic transmission. That's two extra gears over the 2017 Yukon Denali, leading to a numerically lower final drive to help save fuel at highway speeds. Inside, Mastique Ash wood trim differentiates the 2018 model from previous years. A 420-horsepower 6.2-liter V8 engine remains standard for 2018, as do blingy 20-inch wheels with 22 inchers optional. Related Video: Design/Style GMC SUV Luxury gmc yukon denali

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

These are the cars with the best and worst depreciation after 5 years

The average new vehicle sold in America loses nearly half of its initial value after five years of ownership. No surprise there; we all expect that shiny new car to start depreciating as soon as we drive it off the lot. But some vehicles lose value a lot faster than others. According to data provided by iSeeCars.com, trucks and truck-based sport utility vehicles generally hold their value better than other vehicle types, with the Jeep Wrangler — in both four-door Unlimited and standard two-door styles — and Toyota Tacoma sitting at the head of the pack. The Jeep Wrangler Unlimited's average five-year depreciation of 30.9% equals a loss in value of $12,168. That makes Jeep's four-door off-roader the best overall pick for buyers looking to minimize depreciation. The Toyota Tacoma's 32.4% loss in initial value means it loses just $10,496. The smaller dollar amount — the least amount of money lost after five years — indicates that Tacoma buyers pay less than Wrangler Unlimited buyers, on average, when they initially buy the vehicle. The standard two-door Jeep Wrangler is third on the list, depreciating 32.8% after five years and losing $10,824. Click here for a full list of the top 10 vehicles with the least depreciation over five years. On the other side of the depreciation coin, luxury sedans tend to plummet in value at a much faster rate than other vehicle types. The BMW 7 Series leads the losers with a 72.6% drop in value after five years, which equals an alarming $73,686. BMW's slightly smaller 5 Series is next, depreciating 70.1%, or $47,038, over the same period. Number three on the biggest losers list is the Nissan Leaf, the only electric vehicle to appear in the bottom 10. The electric hatchback matches the 5 Series with a 70.1% drop in value, but since it's a much cheaper vehicle, that percentage equals a much smaller $23,470 loss. Click here for a full list of the top 10 vehicles with the most depreciation over five years.