2005 - 1 Owner! Every Option! Hwy Miles! Looks & Drives Amazing! $99 No Reserve! on 2040-cars

Auto blog

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

2023 GMC Canyon revealed with new ZR2-based AT4X trim

Following up on the reveal of its twin, the Chevy Colorado, the 2023 GMC Canyon has made its appearance. Naturally, it shares much with the Chevy pickup, but GMC has gone to greater lengths to differentiate the truck. It comes standard with the high-output engine, all versions feature the wide-track suspension setup, and in addition to the now more luxurious Denali, there's a ZR2-based AT4X trim. As with the new Colorado, the Canyon gets an overhaul of the design. It's down to one bed and cab configuration (short-bed, crew cab), and it features a longer wheelbase with the front axle pushed forward. The Canyon does get a variety of unique design features, though. It has its own front fascia with a tall, rectangular grille. LED lighting is standard on all Canyon models all the way around. That includes the unique fender lights like those found on the Sierra HD. All Canyons also feature the wide-track off-road suspension like the Colorado Z71 and Trail Boss. There are no narrow-track, narrow-body versions, even on the base two-wheel-drive Elevation. That suspension also means all Canyons have a roughly two-inch lift over base Chevy Colorados. The GMCs also get standard 32-inch tires, and they don't feature a front air dam in order to provide better approach angles. The bed, while only available in one trim, is available with a unique storage bin in the tailgate. On the topic of suspension specs, the Elevation and AT4 trim levels have 9.6 inches of ground clearance. The Denali increases that to 10.5 inches, and the AT4X features 10.6 inches. It also picks up the Multimatic spool-valve shocks from the ZR2. But we'll talk more about what comes on the AT4X in a bit. Under the hood of the Canyon is just one engine. It gets the highest-output version of the 2.7-liter turbocharged four-cylinder. The engine makes 310 horsepower and 430 pound-feet of torque. The only transmission is an eight-speed automatic. Two-wheel drive comes standard on Elevation, and other trims come standard with four-wheel drive. The inside of the Canyon is very similar to the Colorado, but it has some unique cues. It has air vents that are more integrated into the squared-off dashboard design, rather than the Chevy's round vents. It has a differently shaped dash pad and trim surrounds, too. The really big differences come on the Denali and AT4X trims, though. The Denali features real wood trim with laser etchings. It also gets lots of real leather and fancy stitching.