Z71 Off Road 4x4-duramax-allison-sle-srw-long Bed-crew Cab-dual Zoneac-pwr Seat on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Junkyard Gem: 1990 GMC S-15 Jimmy 4x4

The General sold the GMC-badged version of the first-generation Chevy S-10 Blazer, known as the S-15 Jimmy or just the Jimmy, from the 1982 through 1994 model years. These trucks were based on the small S-10 pickup and sold well (until small trucks were forced to get bigger and less truck-like after the dawn of the Ford Explorer-inspired commuter-truck era), but they have become difficult to find in vehicle graveyards in our current century. Here's a '90 Jimmy 4x4 with red-primer paint job, found in a self-service yard on California's Central Coast last month. GMC shoppers could get the 1990 Jimmy as a rear-wheel-drive truck, but this one has the four-wheel-drive option that allowed Tahoe-bound skiers to skip the chain monkeys on the way to the slopes (the CHP, understanding that California drivers have a 95% mortality rate on snow or ice, requires chains or four-wheel-drive to get over Donner Pass when there's a hint of snow forecast). GM sold so many millions of small-block Chevrolet V8s that it made economic sense to use the same tooling to produce a V6 version. The result was this truck's 4.3-liter V6 that was three-quarters of the good old Chevy 350 (5.7-liter) V8 that powered so many Camaros, Chevelles and Impalas. The 4.3 didn't make smooth power, but it got the job done and held together quite well. This one was rated at 160 horsepower, good enough for the Jimmy 4x4's 3,512-pound curb weight. These days, though, used-truck shoppers insist on at least two tons of heft plus four doors. Some discount lot in Monterey or Salinas couldn't even get $999 for this truck, and so it ended up in the final stop before the cold steel jaws of the crusher. 1990 was the last model year for the two-door-only Jimmy; for 1991, the Jimmy came with a choice of two doors (for devil-may-care types) or four doors (for drop-the-kids-at-school types). I've always liked the look of the instrument panels on the early S-10s and its siblings; even though the designers had to work within strict budgetary limitations, they made the panels look interesting. This truck nearly made it to 170,000 miles before the end. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So powerful with the 4.3 (the regular S-15 pickup still came with a 2.8-liter V6 as base equipment) that it could destroy a TV camera.

GMC Hummer pickup and SUV previewed in video, set to be revealed in fall

GMC has just provided us with our first good look at the upcoming Hummer EV pickup and SUV. A video was posted online previewing the two models that also happens to feature LeBron James. From clay sculptures to prototypes in various levels of completeness, GM is allowing the world a sneak preview of what’s to come. A couple of the more revealing images come in silhouette photos of both the truck and SUV at the end of the video. The truck has a big four-door crew cab and an exceptionally small bed behind it. The angle from cab to bed is also notable. ItÂ’s not easy to see exactly whatÂ’s going on since itÂ’s shrouded in darkness, but when we saw the Hummer pickup, it was rocking sail panels that resemble the ones on the truck weÂ’re looking at. The truckÂ’s general shape is off-road oriented with squared-off, sharp lines tracing the entire silhouette. Its big, knobby tires and blocky wheels are clear indicators of what GM was aiming for with this electric pickup. As for the SUV, comparisons to the Ford Bronco four-door will be inevitable. If our eyes are picking up the scale of this photo correctly, though, the Hummer SUV appears to be a slightly larger vehicle than the four-door Bronco is. Although, the wheelbase for the SUV is shorter than that of the Hummer truck. ThatÂ’ll help it off-road. Those small bumpers and short overhangs along with the bumper cutouts should be hugely beneficial to approach and departure angles, as well. Hummer EV prototype View 6 Photos GMCÂ’s shots of the Hummer in the studio are equally as revealing. We can see what looks to be an intense front skid plate and two big tow hooks. In addition to the off-road gear, GMC has allowed a look at the frunk. The front “grille” is one piece with the hood of the truck, so the whole assembly pulls up. That makes for what appears to be a very easy-to-load front trunk compared to other EVs that force you to lift items up and over the front of the car. The whole removable roof assembly is exposed in this video, too. We can see the crossbars that the removable panels attach to and also what the truck looks like with the tops removed. The SUV appeared to have removable roof panels from our short glimpse of it in a studio awhile back. Other new details GM mentioned in the video include Adrenaline Mode, Crab Mode and Next-Gen Super Cruise. We donÂ’t know what Adrenaline Mode or Crab Mode do yet, but theyÂ’re certainly off-road modes that GM has designed specifically for this electric Hummer.