2008 Gmc 3500 4x4 Duramax Diesel Extended Cab Dually Automatic Flatbed on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Redesigned 2021 GMC Yukon gets a diesel, AT4 model, Denali-exclusive interior

GMC's most robust family hauler is getting a complete redesign for the 2021 model year, including a new, off-road centric AT4 model, an upscale interior exclusive to its luxurious Denali model, an available air suspension, and, last but not least, a diesel engine.  With Americans obsessing over trucks, it's no surprise that GMC is going hard with its AT4s-for-everybody strategy; the Yukon is no exception. This will be the first model year for the new trim on GMC's largest SUV. This off-road model gets all the goodies you'll need to veer off the beaten path with confidence, including an extra 2.0 inches of ground clearance with the adaptive suspension option (more below), a two-speed transfer case, standard Goodyear all-terrain tires, an off-road mode for GMC's "Traction Select" drive mode system, hill descent control, and some extra underbody skid plates. Since GMC is a premium brand, even the AT4 gets some luxury appointments, such as a heated steering wheel, heated and ventilated front seats, and heated outboard second-row seats. The interior is also adorned in black leather with tan accents and "AT4" embroidery in the seat backs.  Speaking of premium, GMC will introduce an air-ride adaptive suspension with an off-road ground clearance mode as a late-availability option for several Yukon models, and this feature will be included on the Denali trim.  The Yukon and Yukon XL are GMC's variants of Chevrolet's full-sized SUVs, the Tahoe and Suburban. Their fundamental body-on-frame architecture is also shared with GM's half-ton pickup trucks, and thanks to that common engineering, they can also share powertrains. That's normally just a trivial side note when it comes to a new GM SUV announcement, but this time around, it's a bit more meaningful thanks to the introduction of a new light-duty, inline-six diesel in GM's truck lineup last year.  Yep, that means that for 2021, like the Tahoe and Suburban, the Yukon is getting a diesel option. The 3.0-liter Duramax makes the same 277 horsepower and 460 pound-feet of torque as it does in GM's trucks.  GMC's standard engine is still the 5.3-liter V8 that makes 355 hp and 383 lb-ft of torque. The 6.2-liter V8 is also an option like before, producing 420 hp and 460 lb-ft of torque. All engines come with a 10-speed automatic and a choice of rear- and four-wheel drive.

Why 2015 is going to be a huge year for trucks

Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.