2000 Gmc Sierra C3500 on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

2024 GMC Sierra EV revealed with 754 horsepower, 400 miles of range

This is the 2024 GMC Sierra EV in all its Denali Edition 1 glory. You probably knew this was coming. After all, when Chevrolet debuts a new pickup, the GMC version of said truck is typically quick to follow. That’s exactly the case here yet again as the Sierra EV follows the somewhat recent debut of the 2024 Chevy Silverado EV. Per usual, the Chevy and GMC versions of the electric truck share a lot of similarities. TheyÂ’re also different in many of the same ways weÂ’re accustomed to within the GM pickup family. The biggest differentiator is design. If the Silverado EV wasnÂ’t your cup of tea, perhaps the Sierra EV is! Just like the Silverado EV, the Sierra rides on GMÂ’s Ultium platform. ItÂ’s being offered exclusively in Crew Cab form at launch. GMC designers emphasized its upright stance and proportions as typical truck styling. However, close examination will show a lot of curved edges and a focus on aerodynamics to achieve a lower coefficient of drag. The front grille is devoid of any flashy patterns, as GMC has opted to go for the shield aesthetic. Light is heavily used to bring a flash of design to the face — the whole grille features a light-up surround. A three-bar charging status indicator can be seen on the front end, and engineers intentionally mounted the headlights lower in the front fascia than usual. For the Denali Edition 1 (the only version of the Sierra EV available at market launch), all of the exterior trim is done in glossy black, except for the areas you might step on, which are finished in a flat black. The rear features GMCÂ’s MultiPro tailgate, and just like the Silverado EV, the Sierra EV comes with the fancy MidGate. GMC calls it the “MultiPro MidGate,” but itÂ’s the same tech used here as youÂ’ll see in the Silverado EV. With the MidGate down, you get nine feet of storage between the cab and the tailgate. Storage can extend out to 11 feet if you use the MultiPro tailgateÂ’s stopper feature with the tailgate down. Also, the MidGate can be folded with a 60/40 split, so you can get that extra length and still retain some backseat passenger room. All of the powertrain and battery tech is similar to the Silverado EV. That means you get a pair of electric motors for all-wheel drive capability with a combined output of 754 horsepower and 785 pound-feet of torque. YouÂ’ll need to be in “Max Power Mode” (we know, much less exciting than WTF mode in the Hummer EV) to realize all that power.