Duramax Diesel Remote Start Trailer Pkg Pwr Pedals 20"alloys Bluetooth 8320n on 2040-cars

Auto blog

GM diesel pickups first to undergo extra EPA, CARB testing

The effects of Volkswagen's long-running diesel emissions evasion are starting to spill over to other automakers, but General Motors is taking things in stride. The 2.8-liter, four-cylinder Duramax in the 2016 Chevrolet Colorado and GMC Canyon is the first engine to get extra scrutiny by the Environmental Protection Agency and the California Air Resources Board, Automotive News reports. Rather than just the usual in-lab test, it's also being checked on the road. However, the extra evaluation shouldn't have any impact on when the trucks with his mill hit dealers later this fall. "We're in our final stages of the EPA certification, and our launch is on track," Chevy spokesperson Otie McKinley tells Autoblog. The four-cylinder diesel in the trucks makes 181 horsepower and 369 pound-feet of torque, and the automaker is touting low NOx production. In the announcement for the Colorado's specs, the company calls it "the cleanest diesel truck engine ever produced by General Motors." The tech includes exhaust gas recirculation to lower combustion temperatures and improve emissions. There's also a urea tank like on the bigger diesels for full-size trucks, and it gets refilled in time with oil changes. An indication on the instrument panel lets drivers know when that's needed, too. Even with the more demanding testing, the company doesn't seem too worried about the four-cylinder passing. "Part of our development process is on-road and off-road [laboratory] testing," Scott Yackley, Chevy Trucks assistant chief engineer, said to Automotive News. In the wake of the VW scandal, the EPA has pledged more rigorous testing. Before, on-road emissions evaluations were largely limited to heavy-duty vehicles, but the agency has decided to apply the checks more often to other models. There's also now greater cooperation with Canadian authorities.

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

2021 GMC Yukon starts at $51,955, just $100 more than outgoing model

The 2021 GMC Yukon and Yukon XL have prices, and they're bargains considering the upgrades the new model delivers. The base Yukon SLE starts at $51,995 after the $1,295 destination charge, a $100 premium over the current model. The extended wheelbase Yukon XL in base SLE trim starts at $54,695, the same price as the outgoing model. The price for all-wheel drive stands pat for trims that make it an option, at $3,000. Prices for the two-wheel drive Yukon and Yukon XL trim steps are below, with price differences compared to the 2020 models. Keep mind that the new AT4 trim comes standard with AWD, so the AT4 is in a sense closer in price to the SLT and further from the Denali than it appears here: Yukon SLE: $51,995 (+ $100) Yukon SLT: $59,095 (- $810) Yukon AT4: $66,095  Yukon Denali: $69,695 (+ $800) Yukon XL SLE: $54,695 (No change) Yukon XL SLT: $61,795 (No change) Yukon XL AT4: $68,795 Yukon XL Denali: $72,395 (+ $600) The drop in price on the Yukon SLT is in comparison to the 2020 Yukon SLT Standard Edition trim, not the lower-spec SLT trim. The new Yukon comes in at $1,700 more than the 2021 Chevrolet Tahoe, the same price difference in effect between the Yukon XL and Suburban. The standard Yukon is powered by a 5.3-liter V8 with 355 horsepower and 383 pound-feet of torque, the same specs as found in both the Tahoe and Suburban. The Yukon Denali trims, as with the High Country trims on the Chevy twins, outdo the 5.3-liter with a 6.2-liter V8 making 420 hp and 460 lb-ft. Both engines shift through a 10-speed automatic. Stuffing a Yukon XL Denali with options can take the MSRP beyond $80,000, thanks to available features like the panoramic sunroof, rear seat entertainment, air suspension, and Magnetic Ride Control Suspension.   We're still awaiting pricing for the coming 3.0-liter Duramax inline-six with 460 pound-feet of torque, which we expect closer to the on-sale date for the new full-sized SUVs.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Bronco, Yukon, Hummer and a CES recap | Autoblog Podcast #610