2012 Gmc Sierra 2500 Hd Crew Cab Denali on 2040-cars

Auto blog

2020 GMC Acadia AT4 priced just a little more than the SLT trim

Cars Direct has seen the order guide pricing the 2020 Acadia AT4 at $42,495 after destination; that means a $41,300 MSRP plus $1,195 for shipping and handling. GMC has left a lot of pricing room between the rugged, all-wheel drive AT4 and the dressed-up, top-shelf Acadia Denali with AWD, the latter costing $49,495, a $7,000 difference. The spread's blown out some by what appears to be an $800 increase for the 2020 Acadia Denali with all-wheel drive. The 2019 model costs $48,695. On the other hand, it looks like the 200 Acadia SLT trim has gone down in price. Cars Direct says that model will run $41,995, which is $300 less than the 2019 version that goes for $42,295 after destination. The new price leaves a $500 gap between the SLT-1 model with all-wheel drive and the AT4 trim, a figure that's a no-brainer to justify for any buyers trying to get a more butch curb appeal.     The Acadia AT4 package comes standard with all-wheel drive and the 3.6-liter V6 with 310 horsepower and 271 pound-feet of torque, puts black chrome on the grille, and nabs a set of exclusive 17-inch wheels on all-terrain tires. The other two engines in the lineup are a new turbocharged 2.0-liter four-cylinder with 230 horsepower and 258 pound-feet of torque, and cylinder deactivation. That motor will be the standard kit on the SLT and Denali trim levels, supplanting the 3.6-liter that's standard on the 2019 models. The entry-level engine carries over, a naturally aspirated 2.5-liter four-cylinder making 193 horsepower and 188 pound-feet of torque.

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

GM diesel pickups first to undergo extra EPA, CARB testing

The effects of Volkswagen's long-running diesel emissions evasion are starting to spill over to other automakers, but General Motors is taking things in stride. The 2.8-liter, four-cylinder Duramax in the 2016 Chevrolet Colorado and GMC Canyon is the first engine to get extra scrutiny by the Environmental Protection Agency and the California Air Resources Board, Automotive News reports. Rather than just the usual in-lab test, it's also being checked on the road. However, the extra evaluation shouldn't have any impact on when the trucks with his mill hit dealers later this fall. "We're in our final stages of the EPA certification, and our launch is on track," Chevy spokesperson Otie McKinley tells Autoblog. The four-cylinder diesel in the trucks makes 181 horsepower and 369 pound-feet of torque, and the automaker is touting low NOx production. In the announcement for the Colorado's specs, the company calls it "the cleanest diesel truck engine ever produced by General Motors." The tech includes exhaust gas recirculation to lower combustion temperatures and improve emissions. There's also a urea tank like on the bigger diesels for full-size trucks, and it gets refilled in time with oil changes. An indication on the instrument panel lets drivers know when that's needed, too. Even with the more demanding testing, the company doesn't seem too worried about the four-cylinder passing. "Part of our development process is on-road and off-road [laboratory] testing," Scott Yackley, Chevy Trucks assistant chief engineer, said to Automotive News. In the wake of the VW scandal, the EPA has pledged more rigorous testing. Before, on-road emissions evaluations were largely limited to heavy-duty vehicles, but the agency has decided to apply the checks more often to other models. There's also now greater cooperation with Canadian authorities.