2008 Gmc Sierra 2500 Hd Crew Cab Duramax Diesel Lt 4x4-lifted Truck Carfax~nice! on 2040-cars

Auto blog

2017 GMC Canyon steals Cadillac's V6 for a little more power

GMC is fortifying the Canyon with a new powertrain and two new trim levels for 2017. GMC will give the Canyon the 3.6-liter V6 found in the Cadillac ATS, CTS, CT6, and XT5 crossover. The engine will be matched to an eight-speed automatic transmission, which also can be found on Cadillacs, the new 2017 Colorado, and other General Motors vehicles. The new engine comes with variable valve timing, improved direct injection, and Active Fuel Management, which is a form of cylinder deactivation that shuts off two cylinders to increase fuel efficiency and performance. Power is up from 305 to 308 horsepower, while torque increases from 269 to 275 pound-feet of torque compared to the old 3.6-liter V6. With the new transmission, the Canyon benefits from a higher first gear ratio, which should help drivers get off the line more easily when towing large cargo, and lower overdrive ratios for improved fuel efficiency. The 2016 model had a six-speed automatic. The Colorado also gets the eight-speed transmission for '17. GMC previously announced the All Terrain X and Denali models. The All Terrain X trim is offered on the SLE model and comes with the new 3.6-liter V6 engine or the 2.8-liter Duramax turbo-diesel. The All Terrain X gets Goodyear Wrangler DuraTrac P225/65R17 all-terrain tires, a body-color grille surround and matching rear step bumper, bespoke 17-inch aluminum wheels, and a spray-on bedliner. The truck also is fortified with Hill Descent Control and an off-road suspension. The Denali carries the flag as the most luxurious Canyon model and gets a Bose seven-speaker audio system, more chrome, and interior upgrades. In addition to the new models and the powertrain, the 2017 Canyon will be offered with new colors – Dark Slate Metallic, Mineral Metallic, and Red Quartz Metallic – a new IntelliLink radio with a seven-inch touchscreen, a heated steering wheel as an optional extra, and Standard Teen Driver Mode. The 2017 Canyon, with all of its changes, will be available in the fourth quarter of the year. Related Video: Featured Gallery 2017 GMC Canyon Denali: LA 2015 View 14 Photos News Source: GMC Cadillac GMC Truck Luxury Off-Road Vehicles engine gmc canyon chevrolet colorado

GM planning to put its fullsize pickups on a big diet, too

General Motors is just coming off a complete redesign of the Chevrolet Silverado and GMC Sierra for 2014, but in the US fullsize truck market, there is no rest for the weary. According to Reuters, plans are already unfurling for both trucks to drop pounds from their curb weight over the next few years, but this will unlikely be able to keep pace with the 700-pound diet targeted for the next-generation Ford F-150, a truck expected to debut late next year.
The biggest weight reduction for these trucks might not be available until the next full redesign, which will likely happen around 2019, but the article says that smaller updates could shave pounds in the meantime. Two examples given include an "aluminum-intensive" version of the Silverado that could shed 250 pounds and debut around the same time as the lighter-weight, aluminum-bodied 2015 Ford, and there is also talk of reducing weight for driveline components such as axles and driveshafts. These changes are all part of an attempt to meet strict new fuel economy standards coming in 2017, targets which will get even tougher in 2025.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.