Custom Paint, 2 Inch Lift And 4 Wheel Drive on 2040-cars

Auto blog

GM's Ultium EV platform finally shows up in Q3 sales numbers

General Motors has heralded its Ultium battery-electric platform as the future of its passenger car and truck lineup, but for the first two years of its existence, its impact on the marketplace has been virtually nonexistent. Well, that finally changed in the third quarter of 2023, and while the cars based on this architecture don't represent anywhere near the volume of GM's broader combustion portfolio, we're reaching a point where Ultium products are finally in view (and in the hands) of real-world shoppers. At this point, five U.S.-market Ultium models are in production: the GMC Hummer EV, Cadillac Lyriq, Chevrolet Blazer & Silverado EV, and BrightDrop Zevo 600. If you're not familiar with that last one, that's OK; it's a commercial product that you likely won't see on the road for some time. Together, these four combined for 4,257 sales in the third quarter alone — up from 2,663 for the entire first half of the year. While that may not seem like a significant uptick when viewed from altitude, the quarter-to-quarter numbers paint a clearer picture.  Let's toss out the stragglers first. The Chevy Blazer EV, and Silverado EV for example, are barely in production. GM delivered 19 Blazers and 18 Silverados in the third quarter and that's the entirety of their production runs so far. Likewise, GM's BrightDrop Zevo 600 delivery van effectively exists apart from the consumer marketplace, so its contribution of just 35 units can be set aside too. That leaves us the two you've heard of: the GMC Hummer EV and Cadillac Lyriq — models with high sticker prices and long reservation queues.  Through the second quarter (remember, we're talking six months here), GMC sold 49 Hummer EVs. No typo. In the three months that made up the third quarter, GM moved 1,167 of them. Not only is that a dramatic improvement over the first half, but it's more Hummers than GMC sold in the entirety of 2022 (854). Lyriq's improvement was less eye-popping on paper, but after moving just 122 total units in 2022 and 2,013 of them in the first half of 2023, Cadillac managed to up that figure to 3,018 units in the third quarter alone.  GM is betting its short-term EV future on the Ultium platform, so these trends need to continue if that's going to be a profitable wager.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.