2024 Gmc Sierra 1500 Elevation on 2040-cars

Auto blog

GM recalls 740,000 vehicles over daytime running light issue

General Motors is recalling over 740,000 vehicles due to a daytime running light issue that causes all of the affected cars to run afoul of Federal Motor Vehicle Safety Standards. Vehicles affected by this recall are spread across many of GM’s brands. Models include the 2020-2023 Cadillac CT4 and CT5, 2021-2023 Buick Envision, 2022-2023 Cadillac Escalade and Escalade ESV, 2022-2023 Chevrolet Silverado 1500, Suburban, Tahoe and 2022-2023 GMC Sierra 1500, Yukon, and Yukon XL. GM says that the daytime running lights may remain on in these cars when the headlights are activated. This is a problem, because FMVSS rules require that the daytime running lights deactivate once the headlights turn on. If the DRLs remain on, GM says that could result in additional glare, thereby increasing the risk of an accident. The cause of this failure to deactivate the DRLs comes from body control module software that “under a combination of certain pre-conditions, could fail to deactivate the DRLs,” according to GM. Other GM vehicles were tested, but due to a difference in software or hardware, they remain unaffected. If this is reminding you of another recent GM recall, youÂ’d be right, as GM recalled another 340,000 vehicles for the same issue last month. After that original issue was found within GM, the company began looking into its other cars to determine if the population was larger than originally thought. GM found the additional vehicles included in todayÂ’s recall have the problem. The fix will either be via an over-the-air update or it will require you to bring the vehicle into a dealer for a software update, depending on which vehicle you have. Owner notification letters letting folks know what is necessary are currently scheduled to go out on January 23, 2023. Related video: Cadillac Escalade Infotainment Review

2018 GMC Sierra Denali can help you tow without breaking a sweat

Towing a trailer once meant that only those who possessed certain knowledge would be able to go fishing, tow a race car or pull a camper safely. For me, it took four long years of practice working a job behind the wheel of a jacked-up Ford F-250, hauling tons upon tons of mowing equipment for my local parks department, to become proficient. Just how far things have come since then became evident after a recent trip to Utah with GMC, in which we used the half-ton Sierra Denali to tow a set of Polaris side-by-sides through the state. Modern safety technology and a suite of electronic aids make towing simple enough that anyone with a driver's license and something to haul can do it. This revelation came behind the leather-wrapped and heated steering wheel of GMC's outgoing 2018 Sierra Denali. Sitting in the plush, heated and cooled captain's chair, I could barely feel the 6,000 pounds I was towing behind me. Even GMC's smallest full-size truck engine, a 5.3-liter V8 generating 355 horsepower and 383 lb-ft of torque, felt like overkill for what used to amount to a heavy load. With Utah's pristine landscape, the plush confines of the cabin and the uneventful nature of modern towing, mile after mile just streamed by at highway speeds without incident (or excitement). When we finally reached our destination a few hours later, one of GMC's representatives who had chosen to sit in the rear of the cab asked me what I thought about the drive. I pondered for a few minutes and answered with this: "Modern pickup trucks have removed nearly every skill-based variable once associated with towing. I could drive this truck and trailer confidently with just one finger." Consider the near overabundance of towing-assistance systems in the GMC Sierra Denali that I piloted through Utah. Let's start with the most basic of towing skills — something that's now been relegated to the annals of history: reversing a pickup to meet the trailer's hitch. Once upon a time, this required knowing a truck's dimensions and understanding proximity, as well as having a keen eye, a steady foot for both the gas and the brake and the patience to get it right. Now, though, pickups such as the Sierra Denali offer customers a trailer reverse camera system that helps the driver align truck to hitch with pinpoint accuracy.

Watch this GMC pickup crash through a wall into a Florida airport terminal

A man in Florida has been accused of driving his pickup truck through airport grounds and through a wall into the airport's baggage area. It is unclear whether or not the incident was on purpose or an accident, but the shocking scene was captured by numerous cameras and angles. The driver sustained serious injuries but nobody inside the airport was hurt.  The wild crash happened at the Sarasota-Bradenton International Airport at about 3 a.m. on December 19, 2019, according to the Herald-Tribune. Reportedly, the 2015 GMC Sierra was seen driving erratically on a nearby highway earlier in the night, but officers were unable to catch the driver. The truck ended up driving through a chain-link fence, down a service road, and through a wall into the airport's main terminal. As seen in the clips, the truck smashed through the wall and hit a car rental service desk, behind which two people stood. Luckily, the secured desk prevented the truck from hitting the employees, and they escaped without any injuries. The area was mostly empty due to the late hour. In addition to the damage caused to the building, the truck also hit a luggage conveyor belt. Total damages are estimated to be around $250,000. Read more about the crash on WWSB or the Herald-Tribune. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Auto News GMC Truck Videos crash airport