2022 Gmc Sierra 1500 At4 on 2040-cars

Auto blog

Leveling kit now available for Chevy Colorado, but not yet for GMC Canyon

In various bits of news this year concerning the Chevrolet Colorado and GMC Canyon pickups, we kept hearing about a front leveling kit. GM Authority found a few details in early order guides in January. In February, the kit came up in relation to the Canyon's AT4 Off-Road Performance Package, and again with AEV's upgraded Colorado Bison. After three months of waiting, GMA has more info. The kit eliminates the trucks' raked stance by raising the front by one inch, using an electro-coated upper spacer and a polyurethane lower spacer in order to maintain the proper suspension geometry. Installation is a bolt-on job with low-profile nuts, but the task will require a spring compressor. Fitted properly, the kit doesn't void GM's new vehicle warranty on the Colorado. Why do we only mention the Colorado? Because for some reason, the kit isn't available for the Canyon yet as a standalone component; the GMC stays raked without one of the aforementioned option packages. For Chevy, the leveling kit is compatible with any trim in four-wheel drive except the ZR2. It cannot be installed on two-wheel-drive trucks, nor any truck wearing wheels that are 20 inches or above. The kit is available now, ordered through any Chevy dealer for $150. There is a treat in store for GMC buyers, though, but it requires spending a lot more money. GM Authority discovered that the 2021 Yukon will offer the brand's first illuminated emblem. Priced at $475 as a dealer-installed option, a backlit glow will show off the GMC logo in the grille. The brand makes the logo in red and black, it's thought the red logo will get the nod, at least at first. Only the front logo earns the spotlight, not the one on the tailgate. GMA says the tchotchke will be available on all four trims when the new full-size crossover goes on sale in a few months.

2017 GMC Acadia First Drive

We're in the midst of the Second Great CUV War, and the crossovers are winning by a lot. Compact sedans are being hauled around the side of idled factories and unceremoniously shot. FCA, whose be-sweatered CEO is either omnipotent or a troll of the highest order, is organizing a last stand around profit-dense SUVs and trucks on the off chance that gas prices don't rise ever again. It's the tall wagon's finest hour, and GMC is hoping the new Acadia will capture a share of the glory. The old Lambda-platform Acadia was introduced in 2007, leading the full-size, three-row crossover charge that spawned a quartet of semi-indistinct variants, including a Saturn. (Remember Saturn?) These four were truck-like in heft and capabilities, but lighter and better-mannered than their body-on-frame counterparts – and with an unusually stout 5,000-pound towing capacity. The Lambda siblings bombarded established beachheads on the sales territories occupied by minivans and truck-based SUVs. Last year, GMC moved nearly 100,000 Acadias in the US, the best year ever for the model. Now GMC shows up with a deflated Acadia for 2017, 7.2 inches shorter overall, 3.5 inches narrower, and with a 6.4-inch-shorter wheelbase. The company has even carved something like 700 pounds out of its previously portly unibody, mostly due to the size reduction but also through an increase in the percentage of high-strength steel and the use of lighter soundproofing materials. GM's C1XX platform was launched with the Cadillac XT5 earlier this year, and this GMC version is the second to appear. There's even an available four-banger, but more on that in a bit. What remains to be seen is whether the downsized Acadia represents a leaner, meaner fighter or if GMC is sending it into battle hamstrung. Outside, the new Acadia is stealthily innocuous. Gone is some of the lozenge-ness of the outgoing Acadia, but don't fret about it standing out from the crowd. The overall styling falls into lockstep with the Sierra and Canyon. The cut of the rear window, with an upsweep at the trailing edge, emulates the brand's mid-sized truck offering. A chrome mustache cuts across the front fascia below the grille, and there's more brightwork around the front side windows and at the crease below the scallop in the doors. The taillights are more contemporary than before, with an attractive elongated C element comprised of LEDs.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.