2016 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2021 GMC Yukon will pull a 180 thanks to a Hurricane Turn feature

GMC isn't a hip, young startup, but its engineers are out to prove it's possible to teach an old dog new tricks. The next-generation Yukon will offer adventurers seeking a quick turn-around a "Hurricane Turn" feature that functions a lot like Rivian's Tank Turn technology. The two systems use different hardware to perform a similar action. We didn't hear anything about the Hurricane Turn feature during the Yukon's unveiling because GMC planned to keep it under wraps until later, but an eagle-eyed report at Motor Trend uncovered it and quizzed the firm. It's real, and it's engaged when the driver switches the stability control system off, energetically turns the steering wheel in either direction, and mashes the accelerator pedal to the floor. The Yukon needs to be on a loose surface, too. If you're turning right, the on-board computer applies braking power to the passenger-side wheels to prevent them from spinning, while the engine continues to turn the driver-side wheels to rotate the Yukon on its own axis. The exact opposite happens if you're turning left. It's clever and relatively simple; there's no extra hardware required to enable the feature, though it shows the next Yukon is far more advanced than its predecessor. It goes without saying that only four-wheel drive models will receive the Hurricane Turn feature. There's no word yet on whether it will be compatible with all three engine options, or if it will be limited to a certain trim level. GMC will publish additional details about the system, and hopefully a video of it in action, in the coming months. Rivian, on the other hand, leveraged its four-motor electric powertrain to teach the R1T (and presumably the R1S) how to pull a 180. The right wheels turn in the opposite directions as the left wheels – hence the name Tank Turn – to spin the truck around like a CD in a Walkman. Its system doesn't use the brakes. The 2021 Yukon is due in showrooms in the summer of 2020, and Amazon-funded Rivian won't start making the R1S until the end of 2020 at the earliest, so GMC will beat its younger rival to the punch. What remains to be seen is how often motorists use either function. We're betting not very once the initial novelty wears off. Related Video:    

2019 GMC Sierra Denali First Drive Review | The more things change...

ST. JOHN'S, Newfoundland — Canadians love their GMCs. Both anecdotal and statistical evidence supports this. In certain areas of Canada, the Sierra outsells the Chevy Silverado. But in this area of Canada, Cape Spear, the morning fog and salt air are thick. This is the most eastern point in Canada, and the most eastern point of North America if you don't count Greenland. We woke up early and drove to the coast in the new 2019 GMC Sierra Denali, hoping to catch what was promised to be an absolutely spectacular sunrise. The sunrise was a no-go thanks to the fog, turning the sky into a grey mist that melted into the Atlantic. Still, if the world had an edge, this is what it would look like. Driving in an inspiring place like this invites introspection, and since we're in an GMC Sierra, why not examine the brand's place in the world? Recall that for years, a GMC showroom was just packed with slightly more expensive versions of other GM products. Badge engineering, if you will – a dirty word in our business, applied to such notable machines as the Cadillac Cimarron, Buick Terraza, Chevy Aveo and Saab 9-7X. Things, at least on the surface, seem to be changing. GMC says it's making a concerted effort to differentiate its product portfolio from the rest of GM, but the results have been mixed. The brands were supposed to have less product crossover. There's no GMC version of the Chevy Traverse and, initially, there was no Chevy equivalent of the GMC Acadia, though the new Blazer kills that advantage. The Equinox and Terrain are still basically the same vehicle, as are the new 2019 Silverado and 2019 Sierra. At least the two trucks look decidedly different. There's still a family resemblance, but most of the bodywork has been changed. Where the 2019 Silverado adopted some curves, the Sierra stuck with straight lines. Compare things like the headlights, wheel wells and doors. The Sierra still has a massive grille and — aside from the AT4 off-road trim — packs on as much chrome as a 1958 Cadillac, but that's what customers want these days. The Ford F-150 and Ram 1500 are no different in this regard, packing lots of chrome, hard edges, and frontal areas that would give passenger trains a run for their money. At first glance, you'd be hard pressed to tell the Sierra and Silverado's interiors apart from both each other and the outgoing models. It's basically the same design, though the Sierra makes do with some slightly nicer materials.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.