2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines

General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.

2024 GMC Sierra EV revealed with 754 horsepower, 400 miles of range

This is the 2024 GMC Sierra EV in all its Denali Edition 1 glory. You probably knew this was coming. After all, when Chevrolet debuts a new pickup, the GMC version of said truck is typically quick to follow. That’s exactly the case here yet again as the Sierra EV follows the somewhat recent debut of the 2024 Chevy Silverado EV. Per usual, the Chevy and GMC versions of the electric truck share a lot of similarities. TheyÂ’re also different in many of the same ways weÂ’re accustomed to within the GM pickup family. The biggest differentiator is design. If the Silverado EV wasnÂ’t your cup of tea, perhaps the Sierra EV is! Just like the Silverado EV, the Sierra rides on GMÂ’s Ultium platform. ItÂ’s being offered exclusively in Crew Cab form at launch. GMC designers emphasized its upright stance and proportions as typical truck styling. However, close examination will show a lot of curved edges and a focus on aerodynamics to achieve a lower coefficient of drag. The front grille is devoid of any flashy patterns, as GMC has opted to go for the shield aesthetic. Light is heavily used to bring a flash of design to the face — the whole grille features a light-up surround. A three-bar charging status indicator can be seen on the front end, and engineers intentionally mounted the headlights lower in the front fascia than usual. For the Denali Edition 1 (the only version of the Sierra EV available at market launch), all of the exterior trim is done in glossy black, except for the areas you might step on, which are finished in a flat black. The rear features GMCÂ’s MultiPro tailgate, and just like the Silverado EV, the Sierra EV comes with the fancy MidGate. GMC calls it the “MultiPro MidGate,” but itÂ’s the same tech used here as youÂ’ll see in the Silverado EV. With the MidGate down, you get nine feet of storage between the cab and the tailgate. Storage can extend out to 11 feet if you use the MultiPro tailgateÂ’s stopper feature with the tailgate down. Also, the MidGate can be folded with a 60/40 split, so you can get that extra length and still retain some backseat passenger room. All of the powertrain and battery tech is similar to the Silverado EV. That means you get a pair of electric motors for all-wheel drive capability with a combined output of 754 horsepower and 785 pound-feet of torque. YouÂ’ll need to be in “Max Power Mode” (we know, much less exciting than WTF mode in the Hummer EV) to realize all that power.

Huge, pricey trucks haul jobs and profits for the Detroit Three

DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.