2013 Slt Crew 4x4 Navigation Sunroof Leather Heated V8 Vortec Lifetime Warranty on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.

GM phasing out light-duty 1500-series vans

In the market for a fullsize van but don't need a heavy-duty model? You're in the minority, and you're also out of luck. That's because there are barely any more fullsize vans on the market with gross vehicle weight rating of less than 8,500 pounds, the threshold that separates light- and heavy-duty vans.
According to PickupTrucks.com, neither the Ford E-Series, Ram ProMaster, nor Mercedes-Benz Sprinter are available in light-duty versions. Few of the Ford Transit configurations are, either, and now General Motors is discontinuing production of the 1500-series Chevy Express and GMC Savana.
Apparently light-duty versions accounted for just 23 percent of Express sales and only 7 percent of Savanas. Add to that the fact that these 1500 versions were the only ones using the old generation of engines and suspension, and that the Wentzville plant near St. Louis, Missouri, is trying to make room for the next Chevy Colorado and GMC Canyon pickups, and the fate of the light-duty GM van was sealed.