2011 Gmc Sierra 1500 K1500 Sle on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GMC Yukon spy shots show refresh with Acadia-style interior

GMC seems to be moving quickly to get its line-up's interiors all on the same page. These spy photos reveal that the GMC Yukon full-size SUV line will be getting an update that will refresh the exterior somewhat, and the interior much more significantly. The design of the interior is clearly derived that of the new Acadia. The center stack is dominated by one large vertical touchscreen, and sitting in the lower quarter of the screen is a floating multifunction knob. At the base of the screen are some chunky piano-key style buttons. They appear to be connected to some of the climate functions based on the screen's readout. On either side of the screen are vertical air vents, and we can just make out a bit of wood trim. Much of the rest of the dash is still hidden, but it's pretty clear this interior will look very close to that of the Acadia, as the screen and vent layout looks nearly identical. That means there should be an instrument cowl that extends just far enough to meet the center screen, and the rest of the dash should be fairly simple and unadorned. One other note, the steering wheel in this test vehicle has the lights and sensors for Super Cruise, so that will likely be offered, too. As for the exterior of the new Yukon, it won't be radically changed. While the Acadia and Terrain will be nearly all-new, the Yukon will just be a refresh with changes focused on the front and rear fascias. They're still very well covered in these spy shots, but expect some changes to grille shape and headlights to change somewhat. The example pictured appears to be an AT4 trim based on the shortened front bumper for improved approach angle. It also seems likely that the next AT4 will adopt the signature amber fender marker lights from the HD trucks, Canyon and now Acadia. Since this is a refresh, we wouldn't be surprised if we see the new Yukon shown sometime this year or early next. It will probably continue to offer the same range of engines and transmissions, including both gas V8s and the diesel inline-6. Related Video

Say hello to the 2021 GMC Yukon Denali and Yukon AT4 | Behind the Wheel S02 // E04

Behind the Wheel is a video series that shows you a bit of what it’s like to work at Autoblog. The editors and video producers will show you the cars in our fleet, and youÂ’ll get a behind-the-scenes look at some of the personalities who help make the site run.  In this special New Year's edition of Behind the Wheel, Senior Producer Christopher McGraw travels to Vail, Colorado, where GMC unveiled the 2021 GMC Yukon Denali, Yukon XL Denali, and Yukon AT4. What new vehicles are you anticipating the most in 2020? WeÂ’d love to hear from you, so please comment below! Gear the video team used to make this:  Panasonic GH5s: https://amzn.to/2QsJdHE Panasonic Lumix 12-35mm F2.8: https://amzn.to/34bl3W4 Rode VidMic Pro: https://amzn.to/2qrDHKN Tiffen 58mm Variable ND Filter: https://amzn.to/2XpizRw GoPro Hero 7 Black: https://amzn.to/2Qr3Bcm Adobe Premiere: https://amzn.to/32ZTA8B Autoblog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. These deals are available through our affiliate partnership with Amazon.com. Deals are subject to Amazon's schedule and availability. Related Video: