2003 Gmc Sierra 1500 Ext Cab 143. on 2040-cars

Auto blog

2024 GMC Acadia drops lowest trim, entry price starts at $43,995

GMC unveiled the third-generation Acadia at last summer's Detroit Auto Show, loading as many instances of "More" as it could. The all-new midsizer is longer, taller, with more room for occupants and cargo, more standard features, and a more powerful engine with a higher tow rating. The exterior dimensions return the Acadia a footprint closer to the SUV's first-gen proportions, that SUV about 201 inches long. For the 2024 version, overall length stretched another 10.6 inches to 205 inches, swallowing a wheelbase that grew 8.4 inches to nearly match that of the related Chevrolet Traverse, and overall height climbed 3.2 inches — except on the AT4 trim, which sits another inch higher thanks to a suspension lift. Plumping the exterior makes more room for occupants and cargo, GMC saying second-row passengers enjoy 27% more seat room while cargo gets 80% more space, 12.8 cubic feet formerly compared to nearly 23 cubes now. The new engine is a turbocharged 2.5-liter four-cylinder making 328 horsepower and 325 pound-feet of torque, outdoing the 2023 Acadia's retired, turbocharged 2.0-liter four-cylinder that made 228 hp and 258 lb-ft, and the retired 3.6-liter six-cylinder that made 310 hp and 270 lb-ft. It shifts through an eight-speed automatic, a loss of one cog compared to the 2023 Acadia transmission. The additional gumption means gains for the tow rating, now maxed at 5,000 pounds. That's anywhere from 1,000 to 1,700 pounds more than before. The new Acadia also comes standard with new ADAS features like enhanced lane keep assist, front pedestrian and bicyclist braking, and rear park assist, and offers Super Cruise. Early pricing info reveals that "More" extends to the window sticker, which should surprise no one. These aren't minor bumps, either. Assuming destination holds steady at $1,395, MSRPs for the 2024 Acadia and their differences from 2023 are: Elevation: $43,995 (New trim) AT4: $51,395 ($6,600) Denali: $55,695 ($6,195) Some small print: These figures pay for front-wheel drive except on the AT4, which is AWD only. Getting AWD on those other trims costs $2,000, same as now. The 2023 Acadia started with an entry-level SLE trim that cost $38,195, and that's been booted from the lineup, so too the SLT trim that started at $42,495. The 2024 Acadia Elevation brings GMC's familiar trim name into the Acadia ranks, its MSRP representing a $5,800 rise over the former entry price for the Acadia line.

2023 GMC Canyon revealed with new ZR2-based AT4X trim

Following up on the reveal of its twin, the Chevy Colorado, the 2023 GMC Canyon has made its appearance. Naturally, it shares much with the Chevy pickup, but GMC has gone to greater lengths to differentiate the truck. It comes standard with the high-output engine, all versions feature the wide-track suspension setup, and in addition to the now more luxurious Denali, there's a ZR2-based AT4X trim. As with the new Colorado, the Canyon gets an overhaul of the design. It's down to one bed and cab configuration (short-bed, crew cab), and it features a longer wheelbase with the front axle pushed forward. The Canyon does get a variety of unique design features, though. It has its own front fascia with a tall, rectangular grille. LED lighting is standard on all Canyon models all the way around. That includes the unique fender lights like those found on the Sierra HD. All Canyons also feature the wide-track off-road suspension like the Colorado Z71 and Trail Boss. There are no narrow-track, narrow-body versions, even on the base two-wheel-drive Elevation. That suspension also means all Canyons have a roughly two-inch lift over base Chevy Colorados. The GMCs also get standard 32-inch tires, and they don't feature a front air dam in order to provide better approach angles. The bed, while only available in one trim, is available with a unique storage bin in the tailgate. On the topic of suspension specs, the Elevation and AT4 trim levels have 9.6 inches of ground clearance. The Denali increases that to 10.5 inches, and the AT4X features 10.6 inches. It also picks up the Multimatic spool-valve shocks from the ZR2. But we'll talk more about what comes on the AT4X in a bit. Under the hood of the Canyon is just one engine. It gets the highest-output version of the 2.7-liter turbocharged four-cylinder. The engine makes 310 horsepower and 430 pound-feet of torque. The only transmission is an eight-speed automatic. Two-wheel drive comes standard on Elevation, and other trims come standard with four-wheel drive. The inside of the Canyon is very similar to the Colorado, but it has some unique cues. It has air vents that are more integrated into the squared-off dashboard design, rather than the Chevy's round vents. It has a differently shaped dash pad and trim surrounds, too. The really big differences come on the Denali and AT4X trims, though. The Denali features real wood trim with laser etchings. It also gets lots of real leather and fancy stitching.

GM plans to restart production in Mexico on May 20

MEXICO CITY — General Motors is tentatively planning to restart operations at its auto assembly plant in the Mexican city of Silao on May 20, according to a message to workers seen by Reuters on Sunday, as the car industry prepares to exit the coronavirus lockdown. Separately, the president of GM's Mexican unit advised suppliers to prepare to resume operations. “We are now beginning a new phase given the Mexican governmentÂ’s official announcement earlier this week to consider the transportation manufacturing industry as essential for the countryÂ’s economy,” Francisco Garza, president ofGeneral Motors de Mexico, wrote in an email to suppliers dated on Friday that was viewed by Reuters. The reopening of the plant  in Silao would be a positive signal for the auto sector in North America, whose supply lines are highly interconnected between the United States, Mexico and Canada. The plant in the central state of Guanajuato has been idled for weeks due to the coronavirus outbreak. Workers had previously been told to plan to return to their jobs on May 18. A GM spokeswoman said the company could not confirm when it would restart operations at any of its facilities in Mexico because it is awaiting more guidance from the government. The message to the plant's workers came after the government on Friday clarified when the industry could begin easing restrictions imposed because of the health emergency. On Wednesday, the government said automakers could start going back into production from May 18. It then withdrew that advice and suggested the new start date would be June 1. Finally it indicated the sector, which forms the backbone of Mexican manufacturing, could begin operating as soon as next week if companies had the required safety measures in place. U.S. officials and its auto industry have pressed Mexico's government to get its factories open again because American operations depend heavily on parts from south of the border. However, some politicians are wary of opening too fast. Mexico registered its first case of coronavirus weeks after the United States and Canada and the toll of daily infections and deaths in the country reached new peaks over the past few days. The Silao production facility, which makes highly profitable pickup trucks for GM, is one of the biggest automotive plants in Guanajuato, a major Mexican carmaking state. Related Video: