99 1 Ton Cargo Cube Van on 2040-cars

Auto blog

2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines

General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.

2018 GMC Terrain Drivers' Notes Review | Summon the Druids, it's a better Equinox

We've had plenty of time in the all-new Chevrolet Equinox, testing it with all three of its available turbocharged four-cylinders: the 1.5-liter, the 2.0-liter performance upgrade and the diesel fuel economy upgrade. Finally, however, we get a turn behind the wheel of its brother from a different corporate mother: the 2018 GMC Terrain. This duo is certainly one of the most disparate pairings in GM's long badge-engineering past, with virtually no visual similarities inside and out. They're even less similar than the last Equinox-Terrain, which themselves were a far-cry from the Blazer-Jimmy days. They're largely the same under the skin, however, including their selection of engines. For the 2018 Terrain, we sampled the 1.6-liter four-cylinder turbodiesel good for 137 horsepower and 240 pound-feet of torque. It's an unusual powertrain to be sure, as no other compact crossover SUV in this country offers one (though Mazda has been threatening to do so for years now), but boasts an EPA-estimated fuel economy rating of 28 mpg city, 39 mpg highway and 32 mpg combined with front-wheel drive. It's basically the same with all-wheel drive. The as-tested price of the SLT Diesel was a rather hefty $39,605. It did, however, have most options, including the Infotainment Package II and Driver Alert Package II that together include all the extra entertainment and safety gadgets. Contributing Editor James Riswick: Let's be honest, the main difference between the 2018 GMC Terrain and its Equinox sibling is the way they look. As such, I can definitively say I prefer the Terrain. It's far more cohesive and better proportioned than the rather dumpy Equinox. It also avoids the garish over-adornment of the last Terrain even if the floating roofline D pillar has passed its expiry date. I think the interior looks better too. As for the way it drives, the 2018 Terrain demonstrates great improvements from one generation to the next. The steering in particular is greatly superior in its feel and feedback. Body motions are also kept nicely in check. Is it a Mazda CX-5 or Ford Escape beater? No, but it's far more confidence inspiring now. So that's the good. Now, the extremely bad. This diesel engine vibrates so much I can't imagine anyone taking one for a test drive and choosing it over the 1.5-liter gasoline turbo. You feel it through the wheel, the pedals and the seat of your pants constantly. It's particularly bad when stopped and even present when just cruising on the highway.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.