1999 Gmc Savana 1500 High Top Custom Conversion Van 7 Passengers -loaded on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

What the electric Hummer's size and weight means for its efficiency

The 2022 GMC Hummer EV Edition 1. Tim Levin/Insider If you think driving a pint-sized Nissan Leaf is as good for the planet as driving a huge electric Hummer, think again.  The GMC Hummer EV uses significantly more electricity than other EVs, meaning it produces more pollution upstream.  The electric Hummer weighs 9,000 pounds and its battery weighs as much as a Honda Civic. The new electric Hummer rolls through town without a deafening engine rumble or a cloud of toxic fumes, but it doesn't exactly tread lightly.  The colossal truck weighs an astonishing 9,000 pounds. (Think two Toyota Tacomas, three Honda Civics, or 24 Shaquille O'Neals.) Moreover, the GMC Hummer EV is in many ways a supersized gas guzzler for a new era. It repackages many of the same flaws of hulking SUVs and trucks of years past — and proves not all zero-emission cars are created equal. EVs can be energy guzzlers too On the whole, electric cars use less energy than gas-powered ones. But they aren't all equally efficient.  No surprise here: The Hummer needs more electricity than any other EV on the market to move its elephantine frame. The Environmental Protection Agency rates the pickup at 47 MPGe (miles per gallon of gasoline-equivalent). For comparison, the Tesla Model 3 sedan is nearly three times as efficient, earning a rating of 132 MPGe. The Ford F-150 Lightning, another electric truck, gets 70 MPGe.  This has real consequences: Since the US gets 61% of its energy from oil, coal, and natural gas, the more electricity a car needs, the more pollution it creates upstream.  As the Union of Concerned Scientists put it: "Both EV cars and trucks are much cleaner than their gasoline counterparts, but electric trucks are responsible for more global warming emissions than electric cars simply because trucks are larger and heavier."  The 2022 GMC Hummer EV Edition 1. Tim Levin/Insider The Hummer EV is also resource-intensive to manufacture, requiring a ginormous (and weighty) battery to give people the 300-plus miles of range they desire. You could produce three Chevrolet Bolts with the same battery cells consumed by one Hummer.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.