Sharp Xl (( Slt..3rd Row..mnroof..4x4..loaded ))no Reserve on 2040-cars

Auto blog

GM recalling 8.4M cars, 8.2M related to ignition problems

General Motors today announced a truly massive recall covering some 8.4 million vehicles in North America. Most significantly, 8.2 million examples of the affected vehicles are being called back due to "unintended ignition key rotation," though GM spokesperson Alan Adler tells Autoblog that this issue is not like the infamous Chevy Cobalt ignition switch fiasco.
For the sake of perspective, translated to US population, this total recall figure would equal a car for each resident of New Hampshire, Rhode Island, Montana, Delaware, South Dakota, Alaska, North Dakota, the District of Columbia, Vermont and Wyoming. Combined. Here's how it all breaks down:
7,610,862 vehicles in North America being recalled for unintended ignition key rotation. 6,805,679 are in the United States.

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

Junkyard Gem: 1990 GMC S-15 Jimmy 4x4

The General sold the GMC-badged version of the first-generation Chevy S-10 Blazer, known as the S-15 Jimmy or just the Jimmy, from the 1982 through 1994 model years. These trucks were based on the small S-10 pickup and sold well (until small trucks were forced to get bigger and less truck-like after the dawn of the Ford Explorer-inspired commuter-truck era), but they have become difficult to find in vehicle graveyards in our current century. Here's a '90 Jimmy 4x4 with red-primer paint job, found in a self-service yard on California's Central Coast last month. GMC shoppers could get the 1990 Jimmy as a rear-wheel-drive truck, but this one has the four-wheel-drive option that allowed Tahoe-bound skiers to skip the chain monkeys on the way to the slopes (the CHP, understanding that California drivers have a 95% mortality rate on snow or ice, requires chains or four-wheel-drive to get over Donner Pass when there's a hint of snow forecast). GM sold so many millions of small-block Chevrolet V8s that it made economic sense to use the same tooling to produce a V6 version. The result was this truck's 4.3-liter V6 that was three-quarters of the good old Chevy 350 (5.7-liter) V8 that powered so many Camaros, Chevelles and Impalas. The 4.3 didn't make smooth power, but it got the job done and held together quite well. This one was rated at 160 horsepower, good enough for the Jimmy 4x4's 3,512-pound curb weight. These days, though, used-truck shoppers insist on at least two tons of heft plus four doors. Some discount lot in Monterey or Salinas couldn't even get $999 for this truck, and so it ended up in the final stop before the cold steel jaws of the crusher. 1990 was the last model year for the two-door-only Jimmy; for 1991, the Jimmy came with a choice of two doors (for devil-may-care types) or four doors (for drop-the-kids-at-school types). I've always liked the look of the instrument panels on the early S-10s and its siblings; even though the designers had to work within strict budgetary limitations, they made the panels look interesting. This truck nearly made it to 170,000 miles before the end. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So powerful with the 4.3 (the regular S-15 pickup still came with a 2.8-liter V6 as base equipment) that it could destroy a TV camera.