2004 Gmc Envoy Xuv on 2040-cars

Auto blog

New recall issued in 2019 Chevy Silverado and GMC Sierra brake software saga

General Motors (GM) has issued a new recall for select 2019 Chevy Silverado 1500 and GMC Sierra 1500 pickup trucks that aims to resolve a faulty fix for a previous recall. According to National Highway Traffic Safety Administration (NHTSA) campaign No. 20V055000, a software update for the Electronic Brake Control Module (EBCM) could cause the electronic brake assist to be disabled.  The NHTSA first launched a recall for 463,995 Silverados, Sierras, and Cadillac CT6es on December 12, 2019 due to a software issue in the electronic brake control module (EBCM) that could disable the electronic stability control (ESC) and anti-lock braking system (ABS). As a response and resolution to that recall, GM began to reprogram the software in affected vehicles. GM later learned that the fix was creating a different problem. The installed software had its own error that was disabling the electronic brake assist. If customers see “Service Brake Assist” or “Service ECS" diagnostic warnings, they should park the vehicle and have it towed to a dealership, GM warns. While GM was going through the process of testing, pinpointing the issue, determining action and working with the NHTSA, safety experts have criticized Chevrolet and GMC for not reacting promptly and appropriately.  According to the recall, 148,055 are now affected, all of which do not meet the standards of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." To fix the braking issue, GM will once again reprogram the software. GM began notifying owners of the recall on February 10, 2020. Related Video:

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

2023 GMC Canyon debuts August 11

Chevrolet started GM's new-generation midsize truck party with the 2023 Colorado, now GMC's about to hit the stage with the 2023 Canyon. On August 11 at 11 a.m. Eastern time, we'll see what the new generation has done for the Colorado's upscale sibling. GMC teased us with a low angle of the coming Canyon in AT4X trim April. That revealed brawnier bits like big Goodyear Wrangler tires wrapped around 17-inch beadlock-capable wheels, plastic wheel arch flares, and rock rails. The initial version of that trim will be called the AT4X with Edition 1 Package, the front view showing split headlights, a new grille, thin LEDs, and a brush bar like the unit sprouting from nose of the Colorado ZR2 Desert Boss. We're also told there will be a "higher and wider stance, which is factory lifted." The current AT4 trim gets raised one inch, and we have a feeling the AT4X will get around three inches on its tippy toes just like the Colorado ZR2. The rationalization of body styles into a single Crew Cab Short Box will make ease configurations and production. Sadly, the 2.8-liter Duramax four-cylinder diesel is all but certain to be a goner here as well. The 2.7-liter four-cylinder gas engine should slip in here as the sole engine choice in two or three outputs. There's no telling which trims will get which outputs standard, but the choices are a base tune with 237 horsepower and 259 pound-feet of torque, a middle turbocharged tune with 310 hp and 390 lb-ft, and a high-output turboed topper with 310 hp and 430 lb-ft.   The 2023 GMC Canyon AT4X with Edition 1 Package will be available to order on the same day the lineup is revealed, at which time we expect to find out what's included in the Edition 1 versions compared to the AT4X variant that will join the lineup for series production. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.