2022 Gmc Canyon Elevation Pickup 4d 5 Ft on 2040-cars

Auto blog

2019 GMC Sierra Denali and its nifty tailgate roll into dealers

We've got more details about the 2019 GMC Sierra Denali now that it's rolling into dealerships, starting with its floor price of $56,195, including destination fee, for the rear-wheel-drive models. That's a jump of $1,900 over the previous generation of its premium full-size pickup. Four-wheel-drive models start at $60,295. The crew-cab truck has grown in every dimension as well, adding about 4 inches to the wheelbase, nearly 2 inches in length and 1.2 inches in width. There's also nearly 3 inches more rear legroom. Bed options are 5-foot-8 or 6-foot-6. There are three engine options. Two are carryovers from 2018: a 5.3-liter V8 that sends 355 horsepower and 383 pound-feet of torque through an eight-speed automatic transmission, and an available 6.2-liter V8 that makes 420 hp and 460 lb-ft of torque and mated to a 10-speed automatic. Both come with GM's dynamic fuel management cylinder-deactivation technology to optimize power and fuel efficiency. A new 3.0-liter turbodiesel paired with a 10-speed automatic is expected in early 2019. The EPA hasn't yet released official fuel economy ratings, but GM estimates them at 17 miles per gallon in the city and 23 mpg on the highway for the two-wheel-drive versions, and 15/21 in four-wheel drive. The truck gets adaptive ride control which can adjust the dampers every 2 milliseconds based on real-time monitoring of the road and driver inputs for improved ride and handling. A new traction select system adjusts the transmission shift points, throttle mapping and StabiliTrak to tailor performance to different terrain or weather conditions. Inside the crew cab, there's new Forge leather-appointed seats, open-pore wood trim and dark finished aluminum decor, plus an 8-inch-diagonal HD color touchscreen with embedded navigation and Apple CarPlay and Android Auto compatibility. Most of the other new stuff we've covered before, including new C-shaped LED headlights and LED tail and fog lamps, optional 22-inch wheels, full-color head-up display, trailer-hitch assist apps and cameras, and rear-camera mirror. The truck also loses up to 360 pounds from the outgoing model via a scratch- and dent-resistant carbon-fiber bed box that replaces steel, and use of aluminum in the doors, hood and tailgate.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Which electric cars can charge at a Tesla Supercharger?

The difference between Tesla charging and non-Tesla charging. Electrify America; Tesla Tesla's advantage has long been its charging technology and Supercharger network. Now, more and more automakers are switching to Tesla's charging tech. But there are a few things non-Tesla drivers need to know about charging at a Tesla station. A lot has hit the news cycle in recent months with regard to electric car drivers and where they can and can't plug in. The key factor in all of that? Whether automakers switched to Tesla's charging standard. More car companies are shifting to Tesla's charging tech in the hopes of boosting their customers' confidence in going electric.  Here's what it boils down to: If you currently drive a Tesla, you can keep charging at Tesla charging locations, which use the company's North American Charging Standard (NACS), which has long served it well. The chargers are thinner, more lightweight and easier to wrangle than other brands.  If you currently drive a non-Tesla EV, you have to charge at a non-Tesla charging station like that of Electrify America or EVgo — which use the Combined Charging System (CCS) — unless you stumble upon a Tesla charger already equipped with the Magic Dock adapter. For years, CCS tech dominated EVs from everyone but Tesla.  Starting next year, if you drive a non-Tesla EV (from the automakers that have announced they'll make the switch), you'll be able to charge at all Supercharger locations with an adapter. And by 2025, EVs from some automakers won't even need an adaptor.  Here's how to charge up, depending on which EV you have:  Ford 2021 Ford Mustang Mach-E. Tim Levin/Insider Ford was the earliest traditional automaker to team up with Tesla for its charging tech. Current Ford EV owners — those driving a Ford electric vehicle already fitted with a CCS port — will be able to use a Tesla-developed adapter to access Tesla Superchargers starting in the spring. That means that, if you own a Mustang Mach-E or Ford F-150 Lightning, you will need the adapter in order to use a Tesla station come 2024. But Ford will equip its future EVs with the NACS port starting in 2025 — eliminating the need for any adapter. Owners of new Ford EVs will be able to pull into a Supercharger station and juice up, no problem. General Motors Cadillac Lyriq. Cadillac GM will also allow its EV drivers to plug into Tesla stations.