2006 Gmc Yukon Denali Awd /fully Optioned !!!! on 2040-cars

Auto blog

2018 GMC Terrain loses the V6 and gains a diesel for an all-turbo lineup

You may have noticed that compact crossovers are kind of a big deal these days. After eight years on sale, GMC is finally getting a new version of its littlest ute, the Terrain, for 2018. And it can't arrive a moment too soon. The 2018 GMC Terrain made its debut tonight on the eve of the 2017 Detroit Auto Show. The 2018 Terrain looks to be completely new, and is now built on GM's D2XX platform. It again shares a platform and major components with the Chevrolet Equinox; like the 2018 Equinox, the Terrain will offer three engines, including two turbocharged gas four-cylinders and a turbodiesel four. The base 1.5-liter gas four makes 170 horsepower and 203 pound-feet of torque, while the 2.0-liter inline-four puts out 252 hp and 262 lb-ft. (The 2.0 basically takes the place of the 3.6-liter V6 offered in the outgoing Terrain.) GM's 1.6-liter diesel four will also be available, making 137 hp and 240 lb-ft of torque in this application. Both gas engines will be paired with nine-speed automatic transmissions, while the diesel gets a six-speed auto. No fuel-economy claims have been made, but we expect the new models to outdo the current versions, with the diesel reaching around 40 mpg on the EPA highway cycle. View 14 Photos The new Terrain's design is equally fresh and does a good job of differentiating it from the related Equinox, with details very reminiscent of the new GMC Acadia. The lighting elements are even more intricate here, with LEDs used for the daytime running lights and taillamps. GMC designers gave it the floating-roof look, which is successful aside from the odd placement of a trim badge at the base of the D-pillar. Terrains will again be available in SL, SLE, SLT, and range-topping Denali trim, with the latter featuring the signature satin chrome grille, chrome accents, and monochrome paint scheme GMC uses on all of its top-trim models. The interior sees an upgrade in materials and a more-thoughtful layout, with a new version of GM's Electronic Precision Shift gear selector using buttons and switches instead of a lever to open up more space on the center console. Both front- and all-wheel-drive models get a Traction Select system that will tune the shift points and throttle points for specific driving conditions via a knob at the rear of the console. On models equipped with all-wheel drive, a front-drive mode disconnects the rear axle to improve fuel economy.

Next-generation Chevrolet Colorado breaks cover in new spy photos

The next-generation Chevrolet Colorado broke cover in this fresh set of spy photos this week, giving us a glimpse of what to expect when GM's compact trucks are replaced in what is expected to be either 2023 or 2024.  Thanks to its still-extensive camouflage, this prototype doesn't give away a ton about the new Colorado's styling, but in profile, it appears as though the swoopy, upswept rear cab line might become a thing of the past. We wouldn't be surprised to see the new Colorado adopt a more angular, squared-off look more akin to that of its big brother, the half-ton Silverado. The Silverado is also expected to donate what may be the new Colorado's only powertrain. Taking a cue from Ford, Chevy is expected to offer the next-gen Colorado with just a turbocharged four-cylinder engine — the new corporate 2.7T in this instance. The large, 310-horsepower four-pot can easily take over for the 3.6L V6 currently available in the GM twins and one-up the 270-hp Ranger to boot. This would mark the end of both a V6 and diesel option being offered in GM's midsize trucks, and tracks with the company's slow, silent effort to eliminate lower-margin models. We say "trucks" because, well, whatever happens with Chevy is likely to translate to GMC. The Canyon will be due for replacement at the same time, and will likely carry on as a re-skin of Chevy's offering. We're not yet certain exactly when Chevrolet will start selling the next-gen Colorado, but given the reasonably complete state of this prototype, we expect it won't be long now. Rumors suggest it could hit the market in 2023 as a 2024 model.  Related Video: The Best Midsize Pickup: Ranger vs Gladiator vs Tacoma vs Colorado

'Killing a Duramax' Gale Banks YouTube series methodically tunes a diesel to death

Learning or perfecting a skill by watching YouTube videos is known as attending YouTube University. GM Authority picked up on one of the video site's more fascinating courses, hosted by Gale Banks; in a fair world, he should be referred to as Professor Banks when it comes to diesel engines and truck tuning. A few months after GM introduced the updated L5P 6.6-liter Duramax diesel V8 in the 2020 Chevrolet Silverado HD and GMC Sierra HD that ships with 454 horsepower and 910 pound-feet of torque, Banks decided he wanted to methodically tune the engine to death. The purpose of the resulting series, called "Killing a Duramax," is to push more power out of the engine in order to discover which parts break and when — or, as Banks puts it, force-feed the Duramax "until the crank hits the street and the heads hit the hood." With that knowledge, Banks can figure out all the weak points on his way to building what he calls a "Superturbo," that being a supercharged, twin-turbo race engine with more than 1,000 hp. What makes the series fascinating is Banks' knowledge, paired with the company's comprehensive iDash engine monitoring system that keeps tabs on a glut of parameters every step of the way. So for instance, you get Banks explaining the differences between inches of mercury and barometric pressure, how those are different from the water content of the air measured in grains, then showing those readouts on the iDash, then explaining in detail how they affect the air density in the Duramax system. The stock Borg-Warner variable turbo gets a lot of airtime — Banks accuses it of being "out to lunch" because he feels it's the weakest link on the engine. That turns into a turbo teardown and a deep explanation of performance pitfalls, such as when air pressure on the turbine begins to diverge from the boost pressure coming from the compressor. Banks says he can keep close tabs on where power's coming from, because the iDash monitors the horsepower contribution provided by the ambient air, the turbo, and the intercooler separately. The major changes so far are a stouter Precision 7675 turbo and TurboSmart wastegate (episode 5), a twin intake (episode 6), a custom liquid-cooled intercooler from a marine engine, a new GM oil cooler and synthetic oil (episode 10), and new injectors (episode 11).