2005 Gmc Yukon Sle Automatic 4-door Suv on 2040-cars

Auto blog

2024 GMC Sierra HD unveiled with new design and more powerful turbodiesel V8

The 2024 Chevrolet Silverado HD made its debut in September 2022, so it was only a matter of time before the GMC Sierra HD received a similar round of updates. Unveiled online, the truck gains a new-look design and a more powerful turbodiesel V8, among other changes. GMC developed the Sierra HD primarily for towing and hauling so the most significant changes are found under the hood. The available 6.6-liter turbodiesel Duramax V8 engine now develops 470 horsepower at 2,800 rpm and 975 pound-feet of torque at 1,600 rpm, figures that represent increases of 25 and 65, respectively, over the 2023 model and that match the 2024 Silverado HD's. GMC notes it increased low-end torque by about 25% by fitting a new turbocharger. The V8 spins the rear or the four wheels via a 10-speed automatic transmission.  On the gasoline side of the spectrum, the 6.6-liter V8's output stays flat at 401 horsepower and 464 pound-feet of torque. It's now bolted to a 10-speed automatic transmission, and replacing the 2023 truck's six-speed lets the engine run closer to its peak power for longer periods. Here again, rear-wheel-drive comes standard and a part-time four-wheel-drive system is available across the entire line-up. Properly equipped, the 2024 Sierra 2500 HD Crew Cab can tow up to 21,900 pounds. The standard 2500 HD's towing capacity checks in at 22,500 pounds (a 4,000-pound improvement), and the 3500 HD is capable of towing up to 36,000 pounds — that's nearly 13 Subaru BRZs. Buyers have a dizzying selection of trim levels and body styles to choose from. The range includes Regular, Extended, and Crew cabs as well as seven trim levels called Pro, SLE, SLT, AT4, AT4X, Denali, and Denali Ultimate, respectively. The AT4X variant will not be available at launch, and the Denali Ultimate is new for the 2024 model year. Additionally, 3500 HD models can be ordered with dual rear wheels. What the truck looks like depends on the trim level. Broadly speaking, designers drew a more angular front end with a new-look grille, sharper-looking lights, and a redesigned bumper. New wheels are part of the update as well; the 3500 HD dually gets 18-inch polished aluminum wheels, and 22-inch units are optional on single-rear-wheel trucks. Finally, the color palette grows with six optional shades called Titanium Rush Metallic, Sterling Metallic, Volcanic Red Tintcoat, Redwood Metallic, Meteorite Metallic, and Downpour Metallic, respectively.

2019 GMC Sierra AT4 gives Raptor and Ram a new off-road rival

The 2019 GMC Sierra AT4 blends off-road hardware into a modern, thoroughly updated pickup truck that doesn't skimp on power, luxury, or safety equipment. From its higher suspension setup to its available carbon-fiber cargo bed and the new MultiPro tailgate, the 2019 Sierra AT4 is a direct shot across the bow — or cargo beds, if you prefer — of staunch rivals like the Ford F-150, Dodge Ram and Toyota Tundra. Revealed tonight in New York City, ahead of this week's New York International Auto Show, the truck may seem to be in a strange setting. Then again, with the amount of tire-swallowing potholes currently scattered around the Big Apple, a rugged truck like the Sierra AT4 could be the perfect vehicle for either off-road excursions or an especially bumpy commute. Riding two inches higher than the standard 2019 Sierra, the AT4 comes with standard features like all-wheel-drive with a two-speed transfer case, locking rear differential, Rancho monotube shock absorbers designed specifically for off-roading, along with skid plates and 18- or 20-inch alloy wheels fitted with all-terrain tires or optional, mud-loving Goodyear Wrangler Duratecs. Hill descent control and GMC's Traction Select system are also standard. The latter of these two lets the driver choose between preset drive modes, suitable for various types of terrain and weather conditions. The system then adjusts throttle response, shift points, and the electronic stability control according to each mode. Related: 2018 GMC Sierra 1500 buying guide "The 2019 Sierra AT4 is designed for the customer who wants an elevated presence on the road and the capability to venture off life's beaten path," said Duncan Aldred, vice president of Global GMC. "It's also the beginning for the AT4 brand, which will be seen on every vehicle in our lineup in the next two years." Based on the new 2019 Chevrolet Silverado, the GMC Sierra (including the AT4 model) looks to stand out from its corporate cousin in terms luxury touches, along with some subtle exterior details. For the AT4, these visible differences include a body color grill surround and bumpers. Meanwhile, the inner grille, front fog-lights and faux fender vents feature a black-chrome finish. It's not flashy, which is probably exactly what GMC wanted for its upscale truck. The standard engine is a 5.3-liter V8, though buyers can choose an optional 3.0-liter turbo-diesel inline-six or 6.2-liter V8.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.