2003 Gmc Yukon on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2023 GM full-size SUVs get Super Cruise expansion pack first

In August, GM announced it had doubled the size of the network of roads available to its Super Cruise hands-free driving feature. Joining the options list in 2017, Super Cruise had been limited to divided interstate highways in the U.S. and Canada. The expansion opened 200,000 miles of additional divided interstate highway as well as major, undivided highways. Both coasts benefit, but there will be a lot more relaxing motoring on the East Coast especially. North of the border, six of the 10 Canadian provinces add enabled roads. Problem is, no GM vehicles have been able to take advantage of the boon. That changes this month, the automaker saying four of its full-size SUVs in specific trims are first in line to make use of the expansion. The SUVs are: 2023 Chevrolet Tahoe Premier and High Country 2023 Chevrolet Suburban Premier and High Country 2023 Cadillac Escalade, Escalade ESV, and Escalade-V 2023 GMC Yukon Denali Ultimate  The vehicles need to have been built on or after October 3, 2022, a production timeline GM says should put the first examples in customer hands this month. The least expensive way to get into Super Cruise is with the two-wheel drive, $77,625 Chevrolet Tahoe Premier with the 3.0-liter inline-six Duramax diesel and the Advanced Technology Package. Vehicles that use the GM's Vehicle Intelligence Platform electrical architecture and already have Super Cruise will receive an over-the-air update "in the coming months" to access the new roads, at no cost to owners. Since other products like the Cadillac CT4 and CT5, Chevrolet Silverado, and GMC Sierra work with the VIP platform as well, they probably aren't far away from the extra capability and they'll bring a lower financial bar to entry.  Related video:

GM resumes production of its 3.0-liter turbodiesel straight-six

General Motors temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine in August 2021 due to a supplier shortage. Reports claimed the pause would last through 2021, but the engine is already back in production. Enthusiast website GM Authority learned from sources inside General Motors that the straight-six is once again coming off the assembly line at the Flint Engine Plant in Flint, Michigan. There's no official word on precisely what the problem was linked to and whether it was related to the on-going chip shortage that's wreaking havoc across the automotive industry. All we know is that the pause lasted for about two weeks. Called LM2 internally, the six is available in Chevrolet's Tahoe, Suburban, and Silverado 1500 and in GMC's version of these trucks. It's also an option in the Cadillac Escalade. It develops 277 horsepower at 3,750 rpm and a V8-like 460 pound-feet of torque at 1,500 rpm in every application, and it allows these big behemoths to post surprising fuel economy numbers. Fitted to a rear-wheel-drive Tahoe, the Duramax returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make it more efficient than a Blazer. Demand for the diesel-powered trucks is relatively high. While the shortage undoubtedly took a toll on sales, the Duramax represented 8% of Suburban sales and 6% of Tahoe sales in May 2021. There are no other diesel-burning full-size SUVs available new so they have the market to themselves. On the truck side, Ram still makes the EcoDiesel available on some 1500 trims but Ford abandoned the segment. Related Video: Featured Gallery 2021 Chevrolet Tahoe RST View 24 Photos Chevrolet GMC Truck SUV Diesel Vehicles