2006 Gmc W4500 14ft on 2040-cars

Auto blog

New recall issued in 2019 Chevy Silverado and GMC Sierra brake software saga

General Motors (GM) has issued a new recall for select 2019 Chevy Silverado 1500 and GMC Sierra 1500 pickup trucks that aims to resolve a faulty fix for a previous recall. According to National Highway Traffic Safety Administration (NHTSA) campaign No. 20V055000, a software update for the Electronic Brake Control Module (EBCM) could cause the electronic brake assist to be disabled.  The NHTSA first launched a recall for 463,995 Silverados, Sierras, and Cadillac CT6es on December 12, 2019 due to a software issue in the electronic brake control module (EBCM) that could disable the electronic stability control (ESC) and anti-lock braking system (ABS). As a response and resolution to that recall, GM began to reprogram the software in affected vehicles. GM later learned that the fix was creating a different problem. The installed software had its own error that was disabling the electronic brake assist. If customers see “Service Brake Assist” or “Service ECS" diagnostic warnings, they should park the vehicle and have it towed to a dealership, GM warns. While GM was going through the process of testing, pinpointing the issue, determining action and working with the NHTSA, safety experts have criticized Chevrolet and GMC for not reacting promptly and appropriately.  According to the recall, 148,055 are now affected, all of which do not meet the standards of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." To fix the braking issue, GM will once again reprogram the software. GM began notifying owners of the recall on February 10, 2020. Related Video:

2024 GMC Sierra EV Denali Edition 1 reservations closed

Reservation slots for the 2024 GMC Sierra EV Denali Edition 1 are gone. As is the case with just about every vehicle that can be reserved, regardless of cost, there weren't enough slots to satisfy the initial rush. Carscoops noticed the situation first, getting confirmation from GMC that the only avenue remaining for now is to get on a waitlist. GMC's page for the Sierra EV affirms the same, declaring "Reservations are currently full" for the Denali Edition 1. Doing so meant putting down a $100 refundable deposit, a nominal sum that anyone could back out of, but we know by now that market conditions mean between reservation holders and the waitlist there are plenty who will conclude the transaction. Duncan Aldred, head of GMC and Buick, said so himself, telling Automotive News, "It's pretty amazing. A few years ago, when we were planning Hummer, the amount of vehicles sold over $100,000 in the entire industry was not that many. Now, that has radically changed in the last three years. There's been a rapid increase in vehicle prices and there's been an even quicker rise at the top end. We expect to sell out really quite quickly." The Sierra EV Denali Edition 1 comes loaded with quilted seats, real wood trim, Super Cruise, and two motors making a combined 754 horsepower and 785 pound-feet of torque, and starts at $108,695. We don't have a number to put to the phrase "sell out," though. As GM did with the Cadillac Lyriq and Chevrolet Silverado EV, reps wouldn't divulge production caps. Aldred did admit that the reservation number is below 10,000. Two more Sierra EV trims are coming, but they're not due until 2025. That starts with the base Elevation trim bringing an MSRP around $50,000. Note, that MSRP is the prediction now. Three years is a long way away. When reservations open to the public for the standard Sierra EV Denali expected in 2024 and the following trims, GMC plans to keep a tight lid on the pot. Remember, with the Hummer EV, GMC took so many reservations that current production rates mean the automaker won't clear the list for years. Production rates will climb, certainly. However, GM builds the pickups and its Cruise Origin delivery vehicle at its Factory Zero, and there are already 110,000 Silverado EV reservations alone to get through.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.