Gmc: Terrain Financing Available on 2040-cars

Auto blog

GMC Sierra 1500 AT4X: Can you sleep in it?

Autoblog may receive a share from purchases made via links on this page. Pricing and availability are subject to change. The recently introduced GMC Sierra AT4X is an impressive combination of off-roading and luxury. But can you sleep in it? Pickups are great for towing campers or as a platform upon which to build out overlanding rigs, but from the factory they usually aren’t as useful as SUVs to sleep in, considering half of the length of the vehicle is taken up by the bed. Let's see how the AT4X fares. Space The biggest thing to consider when it comes to camping in your car is whether or not there is enough space in it for you and possibly a partner to lay down comfortably. This is tough when it comes to pickup trucks, which are hampered by the fact that half (or more) of the length of the vehicle is taken up by the bed of the truck. Some trucks have added features like lie-flat seats that make sleeping in them a bit easier, though itÂ’s still not a perfect solution. Unfortunately the AT4X is not one of those trucks. While the seats do lay back quite a good amount, I wasnÂ’t able to get comfortable enough to rely on them for a good nightÂ’s rest. To the rear we go. If youÂ’re vertically challenged, you may be in luck, especially if you donÂ’t sleep stretched out. The Sierra 1500 is a wide truck, almost 7 feet wide in fact. The rear bench measures 56 inches in width, which isnÂ’t a great option for most adults unless you really like sleeping in the fetal position. ItÂ’ll do in a pinch but I wouldnÂ’t expect to get a great night's sleep again and again.  Below the bench, which folds up and out of the way, is a relatively flat floor which can offer a bit more length. At 63” it still isnÂ’t enough for me to lie down with the doors closed, but it is much less cramped than spending the night on the bench. The subtle bump in the middle of the floor, which is much less severe than the ridges in the bed, can easily be remedied by an inflatable sleeping pad like the Sea to Summit Ether Light XT, or, even better, a cheap air mattress from Walmart. The Bed The bed of the AT4X seems like the most logical place to sleep. After all, it is named the bed for a reason right? If you have an inflatable mattress, then sure, but due to the ridges on the floor, a simple sleeping pad and sleeping bag will not be enough here. Additionally, the length of the bed leaves something to be desired.

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.