2015 Gmc Terrain Sle-1 on 2040-cars

Auto blog

2017 GMC Acadia First Drive

We're in the midst of the Second Great CUV War, and the crossovers are winning by a lot. Compact sedans are being hauled around the side of idled factories and unceremoniously shot. FCA, whose be-sweatered CEO is either omnipotent or a troll of the highest order, is organizing a last stand around profit-dense SUVs and trucks on the off chance that gas prices don't rise ever again. It's the tall wagon's finest hour, and GMC is hoping the new Acadia will capture a share of the glory. The old Lambda-platform Acadia was introduced in 2007, leading the full-size, three-row crossover charge that spawned a quartet of semi-indistinct variants, including a Saturn. (Remember Saturn?) These four were truck-like in heft and capabilities, but lighter and better-mannered than their body-on-frame counterparts – and with an unusually stout 5,000-pound towing capacity. The Lambda siblings bombarded established beachheads on the sales territories occupied by minivans and truck-based SUVs. Last year, GMC moved nearly 100,000 Acadias in the US, the best year ever for the model. Now GMC shows up with a deflated Acadia for 2017, 7.2 inches shorter overall, 3.5 inches narrower, and with a 6.4-inch-shorter wheelbase. The company has even carved something like 700 pounds out of its previously portly unibody, mostly due to the size reduction but also through an increase in the percentage of high-strength steel and the use of lighter soundproofing materials. GM's C1XX platform was launched with the Cadillac XT5 earlier this year, and this GMC version is the second to appear. There's even an available four-banger, but more on that in a bit. What remains to be seen is whether the downsized Acadia represents a leaner, meaner fighter or if GMC is sending it into battle hamstrung. Outside, the new Acadia is stealthily innocuous. Gone is some of the lozenge-ness of the outgoing Acadia, but don't fret about it standing out from the crowd. The overall styling falls into lockstep with the Sierra and Canyon. The cut of the rear window, with an upsweep at the trailing edge, emulates the brand's mid-sized truck offering. A chrome mustache cuts across the front fascia below the grille, and there's more brightwork around the front side windows and at the crease below the scallop in the doors. The taillights are more contemporary than before, with an attractive elongated C element comprised of LEDs.

GM recalls 740,000 vehicles over daytime running light issue

General Motors is recalling over 740,000 vehicles due to a daytime running light issue that causes all of the affected cars to run afoul of Federal Motor Vehicle Safety Standards. Vehicles affected by this recall are spread across many of GM’s brands. Models include the 2020-2023 Cadillac CT4 and CT5, 2021-2023 Buick Envision, 2022-2023 Cadillac Escalade and Escalade ESV, 2022-2023 Chevrolet Silverado 1500, Suburban, Tahoe and 2022-2023 GMC Sierra 1500, Yukon, and Yukon XL. GM says that the daytime running lights may remain on in these cars when the headlights are activated. This is a problem, because FMVSS rules require that the daytime running lights deactivate once the headlights turn on. If the DRLs remain on, GM says that could result in additional glare, thereby increasing the risk of an accident. The cause of this failure to deactivate the DRLs comes from body control module software that “under a combination of certain pre-conditions, could fail to deactivate the DRLs,” according to GM. Other GM vehicles were tested, but due to a difference in software or hardware, they remain unaffected. If this is reminding you of another recent GM recall, youÂ’d be right, as GM recalled another 340,000 vehicles for the same issue last month. After that original issue was found within GM, the company began looking into its other cars to determine if the population was larger than originally thought. GM found the additional vehicles included in todayÂ’s recall have the problem. The fix will either be via an over-the-air update or it will require you to bring the vehicle into a dealer for a software update, depending on which vehicle you have. Owner notification letters letting folks know what is necessary are currently scheduled to go out on January 23, 2023. Related video: Cadillac Escalade Infotainment Review

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.