2013 Gmc Terrain Slt2 Awd Sunroof Rear Cam Htd Leather! Texas Direct Auto on 2040-cars

Auto blog

The Hummer EV Edition 1 is sold out and it'll be years before other trims arrive

When the 2022 GMC Hummer EV was revealed, GMC noted that there would be lower trims available. The company has since provided a few more details on those lower trims, which is helpful to know now that the only trim on sale next year, the Edition 1, was sold out in a scant 10 minutes. However, it's going to be a long time before they're all available.  The entry-level GMC Hummer EV is the EV2. This is the model that will start at $79,995, and unlike the Edition 1, it gets just two motors, one for each end of the truck, each with electronically locking differentials. Output is down to 625 horsepower and a torque rating of 7,400 pound-feet. Note that this and all other reported torque numbers are after the torque multiplication by the single-speed transmissions, hence the extremely high numbers. The company hasn't given torque numbers at the motors, which would be more comparable to other electric cars. Range is also reduced to 250 miles, probably due to a smaller battery pack. Fast charging is also restricted to 400-volt charging, so it won't be as fast as the higher trim models. The removable roof panels, retractable rear window, MultiPro tailgate, Super Cruise and 35-inch tires are standard. This model only gets fixed steel suspension and two-wheel steering. The EV2 will be the last of the trim levels to go on sale, with a target of spring 2024. Yes, as in 3.5 years from now.  The next level is the EV2X, which will be available a year earlier in the spring of 2023. It gets the same powertrain as the EV2, but adds 800-volt fast charging and a 300-mile range. It also gets the adaptive air suspension and four-wheel steering, plus the associated party tricks of Crab Mode and Extract Mode. This model costs $89,995. The earliest Hummer EV that isn't an Edition 1 and therefore not yet sold out will be the EV3X, the entry-level three-motor model. It goes on sale in the fall of 2022 at a price of $99,995. It's not quite as potent as the Edition 1, though, with an output of 800 horsepower and 9,500 pound-feet of torque. It also lacks the "Watts to Freedom (WTF)" launch control feature. But it does get torque-vectoring with the dual rear motors, which can also lock their speeds to be equal like with the mechanical locking differential at the front. The EV3X's range is 300 miles like the EV2X.  As for the Edition 1, it started $112,595 before it was sold out. Customers are to expect them in fall 2021.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GMC offers more 2024 Hummer EV SUV details, photos

GMC has shared more details about its 2024 Hummer EV SUV after its debut during the NCAA Final Four tournament. The SUV which follows the Hummer EV pickup, is smaller, more maneuverable and has a few features the truck doesn’t. GM says itÂ’s meant to strike a balance between off-road capability and on-road driving. GM also says Edition 1 reservations are already sold out. Compared to the truck, the Hummer SUV has a wheelbase about 9 inches shorter. With four-wheel steering, its turning circle is just 35.4 feet, which GM emphasizes is tighter than that of the Ford Mustang Mach-E (38.1 feet). ItÂ’s also less than the Hummer pickupÂ’s 37.1-foot turning circle. The SUV, which, at 196.8 inches long, is 20 inches shorter than the truck overall. It also features a much shorter rear overhang, at 35.5 inches. While thatÂ’s all helpful maneuvering through city traffic or suburban parking lots, it also provides advantages off-road. It has an approach angle of 49.6 degrees, a 49.0-degree departure angle and a 34.4-degree breakover angle. Suspension travel is 13 inches front and rear, with 16 inches of maximum ground clearance thanks to its Extract Mode that temporarily raises the vehicle to get out of tricky terrain. It can ford water 32 inches deep. It also features the same CrabWalk mode as the pickup. Available Ultravision provides 17 cameras, including underbody views to help navigate the trail. The Hummer SUV benefits from an enclosed cargo area behind the second row of seats. It still features the Infinity Roof with removable panels above the two seating rows to essentially turn the SUV into a convertible. At the rear is a swing-out tailgate that opens wider than the width of the vehicle. A spare tire rides on the tailgate as well. With the rear seats folded, cargo volume peaks at 81.8 cubic feet.  Additional hidden storage space is found below the recycled rubber floor mat, which features a design inspired by the moonÂ’s Sea of Tranquility (that's where Apollo 11 landed). As for technology, the Hummer SUV gets a 13.4-inch infotainment screen, plus a 12.3-inch instrument display in front of the driver. Fourteen cameras come standard, and the aforementioned Ultravision provides a total of 17 cameras, including a surround view. The MyGMC mobile app offers satellite rendered trail maps that can also help manage energy consumption off-road and make sure you have enough juice to make it to a charger when finished.