2010 Gmc Terrain Sle-1 on 2040-cars

Auto blog

GMC moved the headlights down on the 2024 Sierra EV to prevent glare

There are a lot of things that are different between the 2024 GMC Sierra EV’s design and the gasoline Sierra pickup, but one we noticed right away was the headlight placement. On GMÂ’s full-size gasoline trucks, the headlights are about as far up the front fascia as they can be. In the Sierra EV, theyÂ’re positioned significantly further down and into the lower bumper below the grille. Why are we highlighting this particular aspect of the design? Well, unless you only ever drive massive, high-riding trucks, youÂ’re probably very accustomed to being frequently blinded by them on the road these days. In describing the Sierra EVÂ’s headlight placement, designers told us they intentionally put the lights further down to improve matters. We pulled Phil Kucera, a GMC design manager, aside to ask him about the change. “It tends to be a better spot where itÂ’s not glaring in other peopleÂ’s eyes, right, the lower you get,” Kucera says. Beyond blinding others, putting the headlights lower on the face of the truck improves headlight performance for the driver, too. “Typically the lower the better, because thatÂ’s where theyÂ’re going to be on the road, so thereÂ’s less to reflect off of in fog or rain,” Kucera explained. “If you get them up at a certain height, theyÂ’re going to be reflecting certain things like snow, rain or things like that in your eyes.” 2024 GMC Sierra EV Denali Edition 1 View 13 Photos Of course, youÂ’ll notice on the Sierra EV that the daytime running lights (DRLs) are still big and bold in the upper part of the front end. These lights are around for decor, though, and act as pieces of design rather than a functional way to see at night. In other words, theyÂ’re lights, but theyÂ’re not going to dazzle oncoming traffic or cause glare for the driver like a headlight pointed down the road will.  Moving those lights further down in the front should hopefully be a net positive for other drivers coming across the Sierra EV and for drivers of the truck themselves. How the lights are aimed plays just as much a role in how other drivers perceive oncoming lights, though, so weÂ’ll have to wait and see the real-world performance on this one.  WeÂ’ll also note that moving the actual headlights further down the front end doesnÂ’t take anything away from the design of the Sierra EV. It still features a strong, upright stance that the world is accustomed to seeing from new trucks these days. ItÂ’s no surprise, but GM agrees.

GMC Hummer EV First Drive Review | True supertruck, for better and for worse

Right from the start, the 2022 GMC Hummer EV has been advertised with superlatives, mostly in reference to its specifications. GMC has even called it a "supertruck" in its own materials. And while we've received a taste of the truck before, only now have we finally got our hands on the production-spec model, and had the opportunity to drive it both off-road and on the street. What we've found is that the Hummer EV is undoubtedly a supertruck, much the same way that a Ferrari or a Lamborghini is a supercar. It totally delivers on its incredible capabilities, but there are compromises. And they're worth being aware of before plunking down the more than $100,000 a first-year Hummer will run you. That six-figure truck is the version we tested, the Edition 1, which actually rings in at $112,595. It's the only version in production for now, with lower trims coming in the next couple years. It's sold out, but many of the features will be available on the next highest trim level, the EV 3X. Among those features are the three motors, torque vectoring, “Watts To Freedom” launch mode, four-wheel steering, removable glass roof panels, 35-inch tires, Super Cruise, power rear window and MultiPro tailgate. In other words, although you can literally no longer order an Edition 1, you can still order a Hummer EV with nearly the same specification. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. We'll start where most owners probably will: mashing the throttle. No one can resist seeing what 1,000 horsepower and 1,200 pound-feet of torque will feel like. It's even a tad more torque in Watts To Freedom mode, which preemptively runs the cooling system to enable the additional twist. That mode allows the Hummer to hit 60 mph in 3 seconds, and the drama is dialed up with visual, audible and haptic cues. But even without engaging launch mode, the Hummer EV impresses and delights with its acceleration. In addition to pinning you to the seat, the entire truck squats in an exaggerated fashion. It's absurd, especially considering the truck's curb weight that surpasses a truly astounding 9,000 pounds. ThatÂ’s several hundred pounds more than the heaviest GMC Sierra HD 3500 diesel dually. Of course, that weight, as well as the nature of electric motors, means the party starts to calm down as the speed increases. The weight is noticeable in other areas, too.

Surprise! GM putting aluminum in next-gen pickups

Last month, General Motors launched a series of ads touting the benefits of steel over aluminum – specifically, with regard to the Chevy Silverado versus the Ford F-150. (Kind of. We're not sure what a grizzly bear has to do with anything.) We took issue with the ads, with editor in chief Mike Austin saying they "reek of insecurity, and distract from the Silverado's strengths that could be used for positive advertising." But what bothers us more, is that yet another report surfaced claiming anti-aluminum GM will indeed use the weight-saving material in its next-generation fullsize trucks. On Tuesday, GM announced a $877-million investment for its truck plant in Flint, MI. But Reuters says that huge overhaul is because the trucks will use "substantially different equipment than the tools GM uses today." The report specifically states, "People familiar with the company's plans say GM's next-generation pickups and SUVs will make use of various materials, including aluminum and lightweight steel, to shed weight and gain fuel efficiency to meet tougher federal standards." The Silverado already uses a few aluminum components in the engine and hood, and if more widespread use will help GM build its best fullsize trucks ever, then that's great. Honestly, we have no reason to doubt that aluminum will be used in the next Silverado and GMC Sierra. We just hope GM remembers that nothing is ever truly deleted from the bowels of the Internet when it launches the subsequent "look how great aluminum is!" campaign. Related Video: News Source: Reuters Green Plants/Manufacturing Chevrolet GM GMC Truck aluminum steel