1999 Gmc K1500 Suburban Slt Sport Utility 4-door 5.7l on 2040-cars

Auto blog

The Hummer EV Edition 1 is sold out and it'll be years before other trims arrive

When the 2022 GMC Hummer EV was revealed, GMC noted that there would be lower trims available. The company has since provided a few more details on those lower trims, which is helpful to know now that the only trim on sale next year, the Edition 1, was sold out in a scant 10 minutes. However, it's going to be a long time before they're all available.  The entry-level GMC Hummer EV is the EV2. This is the model that will start at $79,995, and unlike the Edition 1, it gets just two motors, one for each end of the truck, each with electronically locking differentials. Output is down to 625 horsepower and a torque rating of 7,400 pound-feet. Note that this and all other reported torque numbers are after the torque multiplication by the single-speed transmissions, hence the extremely high numbers. The company hasn't given torque numbers at the motors, which would be more comparable to other electric cars. Range is also reduced to 250 miles, probably due to a smaller battery pack. Fast charging is also restricted to 400-volt charging, so it won't be as fast as the higher trim models. The removable roof panels, retractable rear window, MultiPro tailgate, Super Cruise and 35-inch tires are standard. This model only gets fixed steel suspension and two-wheel steering. The EV2 will be the last of the trim levels to go on sale, with a target of spring 2024. Yes, as in 3.5 years from now.  The next level is the EV2X, which will be available a year earlier in the spring of 2023. It gets the same powertrain as the EV2, but adds 800-volt fast charging and a 300-mile range. It also gets the adaptive air suspension and four-wheel steering, plus the associated party tricks of Crab Mode and Extract Mode. This model costs $89,995. The earliest Hummer EV that isn't an Edition 1 and therefore not yet sold out will be the EV3X, the entry-level three-motor model. It goes on sale in the fall of 2022 at a price of $99,995. It's not quite as potent as the Edition 1, though, with an output of 800 horsepower and 9,500 pound-feet of torque. It also lacks the "Watts to Freedom (WTF)" launch control feature. But it does get torque-vectoring with the dual rear motors, which can also lock their speeds to be equal like with the mechanical locking differential at the front. The EV3X's range is 300 miles like the EV2X.  As for the Edition 1, it started $112,595 before it was sold out. Customers are to expect them in fall 2021.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Average transaction prices climb to a record $36,270 in January

The automotive sector made a hash of the numbers last month, a mess of pluses and minuses clogging the transaction-price charts according to Kelley Blue Book. The overall industry rose one percent, even though buyers bought fewer cars and light vehicles in January 2018 vs 2017 using the selling-day adjusted rate. Due to January transaction prices rising to $36,270, a record for January, the value of new vehicles sold climbed more than $1 billion compared to January 2017. KBB's transaction prices don't include customer incentives, which changes the complexion slightly; average incentive spending rose to just over ten percent. The average transaction price in December 2017 was $36,756, so January dropped a bit - nothing unexpected, with the month annually blamed for "January doldrums." More revealing is the fact that the average transaction price in January 2017 was $34,910. This year's plumped-up figure came courtesy of the continued shift to crossovers, SUVs, and light trucks, which shouldn't surprise anyone who's read an automotive blog in the past 20 years. That category comprised nearly 70 percent of new vehicle sales for the month. Some manufacturers profited more than others, though. Fiat Chrysler managed 12.8 percent fewer sales in January compared year-on-year, but the company's vehicles sold for $1,300 more. The Ford brand suffered a 6.3-percent dip in sales, but brand transaction prices increased $2,000, while a Lincoln sold for $8,700 more on average. General Motors sold more cars and sold them for more money; overall GM transaction prices rose four percent, or $1,270, while a GMC traded hands for seven-percent more than in January 2017 and a Cadillac got $2,300 more on average. Of KBB's listed automakers, the Volkswagen Group got the most of out its customers, transaction prices rising at the German automaker by 5.6 percent to $42,243 in January 2018 compared to a year earlier. American Honda followed with a 4.3-percent increase to $28,991, GM in third at 4.1 percent to $40,313. Find your next car at Autoblog using our new and used car listings or the Car Finder tool. Broken out by segment, minivans rocked the table, transaction prices leaping by 7.9 percent to $35,380 compared to January a year earlier. Luxury cars boasted the next-highest rise, at 3.6 percent to $58,533.