1989 Gmc Base on 2040-cars

Auto blog

GMC Syclone spools up a storm on Jay Leno's Garage

A storm was brewing on American roads in the early 1990s. That's when Detroit's automakers were producing some of the hottest performance trucks ever devised – models like the Ford Lightning, GMC Typhoon, and its flyweight pickup sibling, the GMC Syclone. Jay Leno just happens to have one of the latter in his garage, and took it out to showcase in this latest video segment. The Syclone was an exercise in absurdity, and could not only trounce any other pickup on the road, it could outrun anything else GM made and just about anything else on the road – beating Ferraris and Porsches off the line. In a pickup, for crying out loud. The kicker is that its engine wasn't such a monster, either: under the hood sat a 4.3-liter turbocharged V6 pumping out what would seem by today's standards to be an adequate 280 horsepower and 350 pound-feet of torque. Even the smaller of the EcoBoost V6s available in today's Ford F-150 produces more than that. But in a lightweight, compact pickup, those figures were enough to propel the Syclone to 60 in 4.3 seconds and run the quarter-mile in 13.6 seconds. Long before the dune-jumping Ford F-150 SVT Raptor or even the Viper-powered Dodge Ram SRT-10, GM made fewer than 3,000 Syclones based on the compact Sonoma (sister to the Chevy S-10) and another 4,700 of the Typhoon, which was mechanically similar but more practical (albeit heavier) wagon bodywork from the Jimmy. But as Jay aptly points out, the Syclone was the one you wanted. Scope it out in the ten-minute video clip above.

2024 Chevrolet Silverado EV output jumps to 754 hp and 785 lb-ft

A couple of days ago, GMC unleashed its 2024 Sierra EV Denali Edition 1 pickup, the luxury truck division's version of the 2024 Chevrolet Silverado EV. As has been the case between Chevy and GMC for decades, GMC designers worked to put ample visual difference between the two pickups that share the similar underpinnings. Unlike what's been the historical case, GMC announced output figures for the Sierra EV well above those for the Silverado. Preliminary estimates for the battery-electric Sierra with the dual-motor powertrain are 754 horsepower and 785 pound-feet of torque. Chevy revealed the 2024 Silverado EV in January with 664 hp and 785 lb-ft in RST trim. We're not sure what happened after the GMC debut, but the Bowtie has updated the Silverado's output to match the GMC with 754 hp and 785 lb-ft. Chevy truck communications spokesperson Sean Szymkowski submitted a statement to various outlets explaining, "As we prepare for production of the Silverado EV, our engineering team has further refined the estimated performance specs for the 2024 Chevrolet Silverado EV RST First Edition. GM now estimates horsepower to be up to 754 and torque up to an estimated 785 lb-ft when Wide Open Watts mode is engaged." It's possible Chevrolet did so in order to forestall backlash about the disparity, or it's possible the automaker already planned to do so after the GMC dropped. On the ICE side, buyers have got used to powertrain parity, the Silverado and Sierra offering the same engines with the same outputs even with pricing about $3,600 apart on the respective top trims. No matter how the decision was made, the benefits redound to Silverado EV buyers. By the way, the "Wide Open Watts" reference refers to the driving mode required to extract these peak power figures. In the GMC Sierra EV, this is called Max Power Mode. We're still looking for clarity on the output figures in everyday driving modes, we believe those will be the same 510 hp and 615 lb-ft that's the maximum in the lower trim Silverado EV Work Truck.    With a year to wait before the Silverado RST EV reaches reservation holders, and with the Chevrolet Work Truck providing real-world feedback before the RST arrives, don't be surprised at more tweaks made to both the Silverado and Sierra EVs before they hit the market. Related video: GMC reveals the all-electric 2024 Sierra EV

Next-gen GMC Sierra spied with diesel power

The next generation of GM trucks is arriving soon, and we're expecting a huge leap forward over the current lineup. The Chevy Silverado and the GMC SIerra sell extremely well, but haven't done much to move the segment forward in a long time. The Ford F-150 has an all-aluminum body and turbocharged V6 power. The Ram 1500 gained a diesel and coil spring suspension. These spy shots show that diesel may be in the cards for GM. Some quick shots and copious use of flash show what is most likely a tank for diesel exhaust fluid and a diesel particulate filter, both necessary equipment for any modern diesel. It's unclear what form factor that engine will come in, though GM has a number of engines to choose from, including the 2.8-liter inline four that's found in the Colorado and Canyon, though that may be a little light duty for the Silverado and Sierra. Other rumors surrounding the trucks suggest a move to an aluminum cab while retaining a steel bed. That seems like a reasonable move for GM, even if the company was attempting to shame Ford for its move to aluminum a few years ago. Look for more news as early as the Detroit Auto Show in January. Related Video: Featured Gallery 2019 GMC Sierra spy shots View 21 Photos Image Credit: Spied Bilde Spy Photos Chevrolet GMC Truck