1986 Gmc Suburban 2500 4wd Monster Truck on 2040-cars

Auto blog

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.

2021 GMC Canyon AT4 Road Test | The everyday tool

Bold take: The GMC Canyon is the most well-rounded midsize truck. Admittedly, “well-rounded” is a lukewarm compliment, but the Canyon does nearly everything well. It is not the flashiest, which is undeniably the Jeep Gladiator. Or the most comfortable, which is the Honda Ridgeline. But for those seeking a midsize truck that looks like a truck, drives like a truck and has a solid interior, the Canyon is the right formula. We would test the 2021 GMC Canyon AT4 for a week and find that itÂ’s pleasant, capable and sturdy off-road. We would haul a bookshelf in the bed, get dirty during a woodsy soft-road jaunt and pile up the miles running around town. In short, itÂ’s exactly what most need in a midsize truck.  The AT4 model is new for 2021, and it replaces the All-Terrain model, a move GMC is rolling out across its lineup. The AT4 adds an off-road-tuned suspension with hill-descent control, beefy 31-inch Goodyear Wrangler DuraTrac tires wrapped around 17-inch aluminum wheels, standard four-wheel drive with locking rear differential and a transfer case skid plate. The AT4 punches up the CanyonÂ’s appearance with red tow hooks, dark chrome elements and a bigger grille thatÂ’s similar to the SierraÂ’s. The Canyon Denali, which was also refreshed for ‘21, is showier, but the AT4 trim feels cooler with its understated off-road vibes. Considering this, we head out for an afternoon drive along a familiar route through DetroitÂ’s northern suburbs. The Canyon is a solid daily driver. The 3.6-liter V6 rated at 308 horsepower and 275 pound-feet of torque is widely used in General Motors vehicles. ItÂ’s powerful and actually sounds pretty good — even throaty — in GMCÂ’s midsize truck. Our passengers are surprised to be pulled back in their seats during hard acceleration, and the eight-speed automatic transmission is well-calibrated for the many jobs the Canyon is called upon to perform. This powertrain, standard in the AT4 and Denali trims, is a step up from the 2.5-liter inline-four and six-speed auto offered on the lower models. ItÂ’s worth it. The 2.8-liter Duramax diesel is an option on higher-spec Canyons, and its 369 lb-ft of torque is tantalizing. For everyday use, take the V6. Our tester with the gasoline V6 and four-wheel drive can tow as much as 7,000 pounds, has a maximum payload of 1,609 pounds and has respectable fuel economy of 17 mpg in the city and 24 mpg on the highway.

GMC Syclone pickup returns via Special Vehicle Engineering

The original GMC Syclone was a 1991 mid-size Sonoma pickup turned muscle truck. Its heavily modified 4.3-liter V6 sported a turbocharger, intercooler, and modified internals, raising output to a Corvette-baiting 280 horsepower and 350 pound-feet of torque. The engine was paired with a four-speed automatic, rear-biased all-wheel drive, and four-wheel antilock brakes (the coming thing). With an all-black livery and a lowered ride height, the Syclone looked the business, and backed up those looks with a 0-to-60 time of 4.3 seconds and a 13.4-second quarter-mile, according to contemporary magazine testing. Given all the recent interest in high-performance pickups, it's amazing that GMC hasn't revived the Syclone. But where manufacturers leave an opening, the aftermarket steps in — in this case that's Specialty Vehicle Engineering, which as CNET reports is resurrecting the nameplate for a build of 100 new Syclones, based on the GMC Canyon, which will update the idea a lot more horsepower. The 2019 Syclone takes as its starting point the extended-cab version of the Canyon. The engine is again a V6, this time a 3.6-liter fitted with a supercharger and a custom cat-back exhaust system, upping output to 455 ponies from the stock 306. SVE's Syclone can be had with rear- or all-wheel drive, and it, too, features upgrades to the brakes and chassis. Six-piston front calipers are fitted in place of the standard four-piston units, and the slotted front rotors are upsized from 12.2 inches to 13.6. The suspension is lowered by two inches up front and five inches at the rear, with stiffer traction bars, bushings, dampers, and a heftier rear anti-roll bar. Unlike the original, the modern Syclone can be had in colors other than black — any of the standard Canyon hues are available — but the appearance is customized with rocker-panel extensions, body-color grille and rear bumper, and a composite hood insert. The interior gets embroidered logos and badges, including a numbered plaque on the dash. The price for the Syclone is $39,995 — that's for the package, on top of the cost of the truck. But at least ordering is easy: The Syclone package can be ordered through select GMC dealers.