1997 Gmc Sonoma Sls Extended Cab Pickup 3-door 4.3l on 2040-cars

Auto blog

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.

Huge, pricey trucks haul jobs and profits for the Detroit Three

DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.

Leveling kit now available for Chevy Colorado, but not yet for GMC Canyon

In various bits of news this year concerning the Chevrolet Colorado and GMC Canyon pickups, we kept hearing about a front leveling kit. GM Authority found a few details in early order guides in January. In February, the kit came up in relation to the Canyon's AT4 Off-Road Performance Package, and again with AEV's upgraded Colorado Bison. After three months of waiting, GMA has more info. The kit eliminates the trucks' raked stance by raising the front by one inch, using an electro-coated upper spacer and a polyurethane lower spacer in order to maintain the proper suspension geometry. Installation is a bolt-on job with low-profile nuts, but the task will require a spring compressor. Fitted properly, the kit doesn't void GM's new vehicle warranty on the Colorado. Why do we only mention the Colorado? Because for some reason, the kit isn't available for the Canyon yet as a standalone component; the GMC stays raked without one of the aforementioned option packages. For Chevy, the leveling kit is compatible with any trim in four-wheel drive except the ZR2. It cannot be installed on two-wheel-drive trucks, nor any truck wearing wheels that are 20 inches or above. The kit is available now, ordered through any Chevy dealer for $150. There is a treat in store for GMC buyers, though, but it requires spending a lot more money. GM Authority discovered that the 2021 Yukon will offer the brand's first illuminated emblem. Priced at $475 as a dealer-installed option, a backlit glow will show off the GMC logo in the grille. The brand makes the logo in red and black, it's thought the red logo will get the nod, at least at first. Only the front logo earns the spotlight, not the one on the tailgate. GMA says the tchotchke will be available on all four trims when the new full-size crossover goes on sale in a few months.