2001 Gmc Sierra 3500 on 2040-cars

Auto blog

GM seatbelt recall affects over 1m Silverados and Sierras

The Basics: General Motors will recall 895,232 examples of the 2014-2015 Chevrolet Silverado and GMC Sierra 1500 pickups in the US. The campaign will also affect the trucks in markets worldwide, and the total number the company will recall is 1,037,982. The Problem: A steel cable connects the seatbelt to the vehicle, but over time repeated bending can cause the part to fatigue and separate. Injuries/Deaths: None reported. The Fix: Dealers will enlarge the side shield opening and install a pusher bracket on the tensioner. Technicians will also replace the entire tensioner assembly if necessary. If You Own One: GM will contact owners about the recall. The company hasn't said when those notifications would begin. More Information: There are still about 3,000 new examples of these older pickups at dealerships. Until mechanics fix the problem, these vehicles are subject to a stop-sale. Similar problems have affected the General's vehicles in the past. In 2015, the company recalled over 400,000 units of the 2011-2012 Chevrolet Malibu for fatiguing cables. It also hit over a million Lambda platform crossovers in 2014. GM Recalling Certain 2014-15 Pickups to Repair Seat Belts DETROIT – GM is voluntarily recalling 895,232 model year 2014-15 Chevrolet Silverado and GMC Sierra 1500 pickups in the United States because the flexible steel cable that connects the seat belt to the vehicle can fatigue and separate over time as a result of the driver repeatedly bending the cable when entering the seat. This issue was discovered through warranty data, and there have been no reports of crashes, injuries or fatalities related to this issue. For trucks in the field, dealers will enlarge the side shield opening, install a pusher bracket on the tensioner, and if necessary, replace the tensioner assembly. The recall in the United States includes a stop-sale of approximately 3,000 new 2014 and 2015 model year pickups still on dealer lots. Dealers will repair the vehicles prior to delivering them to customers. Customers will be notified by General Motors. They also can look up their vehicle identification number (VIN) at either https://vinrcl.safercar.gov/vin/ website or at https://my.gm.com/web/portal/ownercenter to see if their vehicle is part of the recall. GM also will voluntarily recall and repair these models in other countries where they are sold, including Canada, Mexico, and several countries in Latin America and the Middle East.

Junkyard Gem: 1973 GMC Sierra Grande Camper Special

Starting in the 1973 model year, General Motors introduced the "Rounded Line" family of C/K-series Chevrolet and GMC trucks, and sales of the pickup versions continued all the way through 1987. Nice examples of these trucks can sell for large money, but the junkyard teaches us that not all collectible vehicles are worth rescuing and fixing up. Here's a reinforcement of that lesson, courtesy of a first-year GMC C2500 Camper Special with the high-zoot Sierra Grande trim level, found in a self-service yard just outside of Denver, Colorado. I'm no GM truck expert, but I know enough to stay clear of the battles over what to call this pickup. Let's just say it's a three-quarter-ton, rear-wheel-drive third-gen C-Series with really cool badges. Yes, I bought this badge for my garage wall, and it was totally worth the $4.23. GM came up with the Camper Special package during the late 1960s, when removable pickup campers became popular, and for 1973 it included heavy-duty springs and a wiring harness made to plug into the connectors on slide-in truck campers. It also included woodsy-looking badges, but someone pried the ones off this truck before I could buy them. This may well have been a one-owner truck, because it still had original warranty paperwork inside. Here we see that it was purchased new on August 2, 1973 (which happens to be the day that George Brett got his very first hit in the big leagues) by a resident of Compton, California. Yes, that Compton. The build tag tells us that this Camper Special was born at the Fremont Assembly plant in California, which became the GM-Toyota NUMMI venture in 1984 and is now the Tesla Factory. I think most 1973 C/K pickups sold new in Colorado would have come from Pontiac Assembly in Michigan. There was a time, not many years ago, when a genuine 454-cubic-inch (that's 7.4 liters to those of you sweating under the oppressive weight of the French Empire's Measurement System) big-block Chevrolet engine would have been yanked out and purchased within hours of hitting the rows of a yard like this. These days, engine-swappers can get more power with less weight from any number of donor vehicles. If this engine is the original 454, it was rated at 240 horsepower and 355 pound-feet (down from 270 hp in 1972 due to emissions-related changes). This truck had a three-speed automatic transmission, like most optioned-up Detroit pickups of its era.

2024 GMC Canyon AT4X AEV Edition pushes the limits even higher

The GMC Canyon AT4X is already a formidable off-road pickup truck, but now it’s getting even more capable with the addition of the 2024 GMC Canyon AT4X AEV Edition. If youÂ’re familiar with the Chevrolet Colorado ZR2 Bison, then by proxy youÂ’re familiar with GMCÂ’s version of it already. Like the bow-tie version of the pickup, the AT4X AEV Edition is lifted an additional 1.5 inches beyond the regular AT4X, giving it 12.2 inches of ground clearance, which is identical to the ZR2 Bison. You also get to work with a 38.2-degree approach, 26.0-degree departure, and 26.9-degree breakover angle. ItÂ’s fitted with AEV beadlock wheels wrapping 35-inch Goodyear Wrangler Territory mud-terrrain tires and uses hot-stamped boron steel skid plates for the radiator, steering gear, transmission, transfer case, fuel tank and rear differential. Appearance-wise, the AEV Edition sports a new front fascia with integrated fog lights and larger fender flares that facilitate the bigger tires. It uses AEV stamped-steel front and rear bumpers that include heavy-duty recover points, and the front bumper is compatible with a winch. The rear bumper (below) is particularly clever, as it has easily removable plastic corners that can be replaced with 10 millimeter-thick steel skid plates for a little extra protection on the trail. YouÂ’ll find an AEV in-bed mount for the spare tire, too, as the big 35-inch tire doesnÂ’t fit in the usual under-bed storage spot. GMC wasnÂ’t ready to provide hard numbers for payload or towing, but expect the Canyon AT4XÂ’s specs to go down in a similar manner as the ZR2 Bison that lost 230 pounds of payload capacity and 500 pounds of towing. And yes, the AEV Edition retains the AT4XÂ’s high-output four-cylidner that produces 310 horsepower and 430 pound-feet of torque. You get all the other AT4X goodies, too, including things like the Multimatic spool valve shocks and electronic-locking front and rear differentials. It also gets the sweet off-road launch control system that initially debuted on the Bison that can adjust power in real-time based on the traction available off-road. On the inside, the AEV Edition adds three standard auxiliary switches that you can hook up off-road or overlanding accessories to. The truck is also fitted with AEV-embroidered headrests and AEV all-weather floor liners. Pricing for the AT4X AEV Edition isnÂ’t available quite yet, but GMC says itÂ’s expected to be available for customer orders later this year.