2000 Gmc 3500 Dually Utility Diesel Service Truck on 2040-cars

Auto blog

GMC Hummer EV will weigh 9,046 pounds

In the 2000s, Hummer's unique breed of off-roaders summoned a dark cloud of disapproval from environmentalists because they were gas-guzzling SUVs with mammoth dimensions. GMC's born-again Hummer EV will escape the gas guzzler label by running solely on electricity, but it will be even bigger and much heavier than its predecessors. Enthusiast site GM-Trucks reported the Hummer EV will tip the scale at 9,046 pounds (4,103 kilos if you're outside of the United States) in its quickest configuration, and a GMC spokesperson told Autoblog that figure is accurate. For context, the H1 Alpha released for 2006 (and often considered the ultimate Hummer) weighed 8,113 pounds, the H2 checked in at 6,614 pounds with the 6.2-liter V8, and the H3 was comparatively light at 4,600 pounds. When it lands, the Hummer EV will be one of the heaviest new cars sold in the United States. Part of its plumpness can be attributed to its colossal dimensions; it measures 216.8 inches long, 86.7 inches wide, and 81.1 inches tall. In comparison, the H1 stretched 185 inches long, 87 inches wide, and about 78 inches tall. The electric powertrain also played a major role in slinging the Hummer's weight into dually pickup territory. Batteries are heavy, and the Hummer EV's Ultium pack reportedly has a capacity of over 200 kilowatt hours. It has three electric motors, too. Note the 9,046-pound figure applies only to the sold-out Launch Edition model, which will offer 1,000 horsepower, the aforementioned 200-kilowatt battery, and the supercar-like ability to hit 60 mph from a stop in three seconds. GMC will launch cheaper, slower, and presumably considerably lighter variants of the truck in the early 2020s. Although SUVs are often heavier than comparable trucks due to the additional sheet metal, the people-hauling Hummer should weigh less than the cargo-carrying variant. As we reported in April 2021, its output will be limited to 830 horsepower because it's 20 inches shorter than the truck, and the bigger battery pack doesn't fit in this footprint.

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.

2021 GMC Yukon will pull a 180 thanks to a Hurricane Turn feature

GMC isn't a hip, young startup, but its engineers are out to prove it's possible to teach an old dog new tricks. The next-generation Yukon will offer adventurers seeking a quick turn-around a "Hurricane Turn" feature that functions a lot like Rivian's Tank Turn technology. The two systems use different hardware to perform a similar action. We didn't hear anything about the Hurricane Turn feature during the Yukon's unveiling because GMC planned to keep it under wraps until later, but an eagle-eyed report at Motor Trend uncovered it and quizzed the firm. It's real, and it's engaged when the driver switches the stability control system off, energetically turns the steering wheel in either direction, and mashes the accelerator pedal to the floor. The Yukon needs to be on a loose surface, too. If you're turning right, the on-board computer applies braking power to the passenger-side wheels to prevent them from spinning, while the engine continues to turn the driver-side wheels to rotate the Yukon on its own axis. The exact opposite happens if you're turning left. It's clever and relatively simple; there's no extra hardware required to enable the feature, though it shows the next Yukon is far more advanced than its predecessor. It goes without saying that only four-wheel drive models will receive the Hurricane Turn feature. There's no word yet on whether it will be compatible with all three engine options, or if it will be limited to a certain trim level. GMC will publish additional details about the system, and hopefully a video of it in action, in the coming months. Rivian, on the other hand, leveraged its four-motor electric powertrain to teach the R1T (and presumably the R1S) how to pull a 180. The right wheels turn in the opposite directions as the left wheels – hence the name Tank Turn – to spin the truck around like a CD in a Walkman. Its system doesn't use the brakes. The 2021 Yukon is due in showrooms in the summer of 2020, and Amazon-funded Rivian won't start making the R1S until the end of 2020 at the earliest, so GMC will beat its younger rival to the punch. What remains to be seen is how often motorists use either function. We're betting not very once the initial novelty wears off. Related Video: