Sle Hd V8 6.0l Auto Trans 4x4 Ext Cab 4drs Short Bed Texas 1 Owner Truck Sharp on 2040-cars

Auto blog

GMC Hummer EV heads north for winter

GMC announced early Tuesday that its new Hummer EV pickup is ready to head north for winter testing. What might seem like a trip in the wrong direction to us warm-blooded enthusiasts is a critical next step in the development of GM's new electric truck.  We also got a couple of teaser pics of the Hummer EV at GM's Milford Proving Grounds, along with two shots of development prototypes being assembled, of which GM says it has "a series." There's not much new to see here, but GM says there's more to come. "The GMC HUMMER EV has arrived at GM’s Milford Proving Grounds to continue validation tests and will head to northern Michigan to run through the teamÂ’s grueling winter testing process," GM said in its announcement. "We will document the journey and share updates in the coming weeks and months." The GMC HUMMER EV arrived at GM?s Milford Proving Grounds to c View 3 Photos The GMC Hummer EV Edition 1 will feature three electric motors, enabling torque vectoring. GMC says these motors produce 1,000 horsepower, though we don't yet have a final torque figure. Power comes from a 24-module Ultium battery pack which can provide an estimated 350 miles (or more) of range. GMC says this new architecture supports 800-volt fast charging up to 350 kW, which is comparable to the system Porsche introduced with its Taycan electric sedan, and GMC says it can replenish 100 miles of range in just 10 minutes. Planned variants include a two-motor setup, and an alternative three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of two feet and the capability to climb over an 18-inch vertical obstacle. Edition 1 Production begins late next year, with a starting price of $112,595. In fall 2022, we'll see the regular top trim starting at $99,995; In spring 2023, weÂ’ll get a mid-level trim that has three motors, air suspension and four-wheel steering -- but no torque vectoring -- starting at $89,995. 

AEV-upgraded GMC Canyon AT4X, Chevy Colorado ZR2 appear in spy photos

As with the previous generation, it appears the 2023 Chevy Colorado ZR2 will be getting a special AEV version. Not only that, but its twin, the GMC Canyon AT4X will get one, too. And as these spy photos show, they'll have some additional off-road accessories included, as well as bigger tires. We'll start with the GMC Canyon. The first example of the truck without any camouflage is not quite fully upgraded like the camouflage vehicles. But it has one part not seen on the others: the AEV snorkel. 2023 Chevy Colorado ZR2 AEV Bison prototype View 13 Photos The two appear to be riding on larger Goodyear Wrangler Terrain MT tires. These look like 35-inch examples -- 2 inches larger than the biggest tires available on the ZR2 and AT4X. They're also mounted on beadlock capable wheels. Besides the bigger tires, both trucks also feature a new bed-mounted spare tire. It's a full-size spare, and unlike past bed-mounts, this one places the tire flush against the cab. The benefit of moving the spare to the bed is departure angle. And while this position looks a little less like how trophy trucks carry their spares, it should provide better cargo space. Rear visibility probably isn't great, though. Generalizing based on what we know about the current ZR2 Bison, the new AEV trucks will probably get unique grilles, steel bumpers, fender flares, a suspension lift and possibly even axle ratio changes. Additional options such as a winch could be offered, too. We expect the trucks will be revealed within the next year, since the base trucks have already been shown, and these are just upgraded versions of those trucks. Related Video: 2023 Chevrolet Colorado walkaround

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: