Denali Diesel 6.6l Nav Lifted, Power Sunroof, Heated Seat, Navi, Navigation on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GMC's Bronco-slaying SUV will remain a dream, report says

GMC won't help rival Ford in its quest to dethrone the Jeep Wrangler, according to a recent report. The body-on-frame off-roader the firm planned as an alternative to the upcoming Bronco and the fourth-generation Wrangler allegedly fell victim to a top-down restructuring plan implemented recently by parent company General Motors. Citing anonymous inside sources, Muscle Car & Trucks reported the rugged SUV remained part of GMC's long-term product plan until November 2018. It was shaping up to be one of the company's most distinctive models in decades. It should have arrived as a dedicated off-roader developed and sold exclusively by GMC; it wouldn't have had a twin in the Chevrolet portfolio. The problem, according to the report, is that the off-roader (which might have revived the heritage-laced Jimmy nameplate) should have been built on the 32XX platform designed to underpin the next Chevrolet Colorado/GMC Canyon twins. General Motors canceled that project to save money, so the SUV was consigned to the attic before we even spotted prototypes testing on and off the pavement. The updated pickups will instead arrive on an evolution of the frame found under the models currently found in showroom. There's no word on why that architecture can't support a Wrangler-like SUV. GMC never confirmed plans to build an off-roader aimed at the Jeep Wrangler and the upcoming Ford Bronco, so it certainly won't validate reports claiming it has canceled the model. This isn't the first time we've heard about a body-on-frame SUV made by a brand in the General Motors portfolio, though. Hummer was supposed to take the fight directly to Jeep with an off-roader accurately previewed by the 2008 HX concept, but it shut down before it finished developing the model. Rumors of GMC picking up where Hummer left off have come and gone on a shockingly regular basis over the past few years, yet the Wrangler remains in a class of one.

GMC could have used Jeep's prized grille design on its born-again Hummer

General Motors confirmed it's bringing the Hummer nameplate back on an electric, GMC-badged pickup by publishing a dark photo of its front end. The battery-powered drivetrain under the sheetmetal represents a tectonic shift, but we noticed another flagrant break with tradition: it wears six slot-like inserts instead of seven like on every previous Hummer and countless Jeeps. Adding an extra slot wouldn't have landed GMC in hot water. The seven-slot grille has historically been associated with Jeep, and the company proved it's willing to go to significant lengths to ensure another automaker — especially one it perceives as a rival — doesn't use it. Parent company Fiat-Chrysler Automobiles (FCA) bitterly sued Mahindra over the Roxor's design, including its five-slot grille, and won in 2019, forcing the Indian firm to unveil a redesigned side-by-side for the 2020 model year. And yet, stylists would have very likely been able to get away with it on the Hummer. While General Motors owns Hummer, the brand traces its ancestry to 1970, when American Motors Corporation (AMC) purchased Jeep from Kaiser and changed the name of its General Products Division to AM General Corp. The division manufactured the rear-wheel drive, CJ-based DJ for the United States Postal Service and began developing the Humvee in 1979. Jeep and AM General went their separate ways when Renault began investing in AMC. Foreign companies weren't allowed to own defense contractors, and AMC had more to gain by gradually selling out to Renault than by keeping AM General, so it divested the division to LTV Corporation in 1983. Humvee production started shortly after, but no one protested its seven-slot grille because there was no risk of it stealing sales from a comparable Jeep model. It was manufactured exclusively for the U.S. Army, and civilian sales weren't planned. H2SUV View 4 Photos The original civilian Hummer released in 1992 must have raised more than a few eyebrows but, here again, it didn't directly compete with one of Jeep's off-roaders, so no one complained. It was huge, correspondingly expensive, and its portal axles made the YJ-generation Wrangler wet its pants. It's the H2 concept (pictured above) unveiled at the 2000 Detroit Auto Show that set off alarm bells in Auburn Hills. DaimlerChrysler's lawyers counted the slots in the chrome-plated insert that dominated its front end and shuddered when they reached seven.