2020 Gmc Sierra 2500 At4 4x4 on 2040-cars

Auto blog

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.

GM might lose 90-year U.S. sales crown over chip shortage

Automotive News editor Nick Bunkley tweeted on October 1 that according to AutoNews data, General Motors "has been the largest seller of vehicles in the U.S. every year since passing Ford in 1931." With automakers having turned in light car and truck sales data for the first three quarters of 2021, GM's 90-year-run might not reach 91. According to AN figures, Toyota was 80,401 vehicles ahead when the October workday started. Worse, GM is so far behind its historic pace that it might only sell enough light vehicles in the U.S. to match its numbers from 1958.  Meanwhile, the New York Times put a few more salient numbers to the pain GM and Toyota are enduring alongside the the rest of the industry. GM sold 33% fewer cars in Q3 2021 than it did in Q3 2019 during the dark days of the pandemic, 446,997 units this year as opposed to 665,192 last year. GM's Q3 2020 was only down 13% on Q3 2019. Over at Toyota, the bottom line showed a 1% gain in Q3 2021 compared to 2020, with 566,005 units moved off dealer lots. The finer numbers show two steps forward and one step back, though; Toyota's September sales were down 22% compared to last year.  GM remains optimistic about what's ahead, GM's president of North American operations telling the NYT, "We look forward to a more stable operating environment through the fall." We'd like to see that happen, but we don't know how it happens. The chip shortage said to have been the inciting incident for the current woes isn't over, and not only can no one agree when it will be over, the automakers, chip producers, and U.S. government still can't get on the same page about who needs what and when. Looking away from that for a second shows articles about "No End In Sight" for supply chain disruptions in early September, before China had to start working through power supply constraints, global supply chain workers started warning of a "system collapse," and roughly 500,000 containers sat waiting to be unloaded at Southern California ports — a record number seemingly broken every week. And back to chips, we're told just a few days ago the chip shortage is "worse than we thought."   For now, the NYT wrote that GM dealer inventory is down 40% from June to roughly 129,000 vehicles, and down 84% from the days when dealers would cumulatively keep about 800,000 light vehicles in stock. However, GM just announced it would have almost all of its U.S. facilities back online next week, although some would run at partial capacity.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.