2015 Gmc Sierra 2500 Denali 2500 4wd on 2040-cars

Auto blog

2014 GMC Sierra 4.3L V6 to offer segment-best 305 LB-FT

General Motors has released more information on the 4.3-liter V6 available in the 2014 GMC Sierra. The engine will serve up 285 horsepower and 305 pound-feet of torque, with a six-speed automatic transmission, and giving the V6 Sierra a maximum tow rating of 7,200 pounds in regular cab, short bed four-wheel drive configuration. GM claims that figure is 500 pounds more than the equivalent Ford F-150 equipped with a 3.7-liter V6, and 700 pounds more than the Ram 1500 with its 3.6-liter V6. Buyers can expect to see the 2014 GMC Sierra with the 4.3-liter engine start at $25,085 including destination.
While the engine does deliver more torque than either of its main competitors, it falls short on the horsepower front. The 3.7-liter V6 in the F-150 develops 302 hp while the 3.6-liter V6 in the Ram 1500 yields 305 hp. GM says fuel economy estimates for its newest entry will land later this year. Check out the full press release below for more information.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Here's how Detroit is selling more luxury vehicles than Germany and Japan

Now there's an attention-grabbing headline, eh? Although the answer to the riddle - pickup trucks and SUVs - might be somehow deflating, the numbers involved deserve a going over. According to TrueCar's figures (click on the table to enlarge), six of the year's ten best-selling vehicles in the US that sell for a transaction price above $50,000 are body-on-frame, and the Mercedes-Benz E-Class is the only foreigner to crack the top five. Every enthusiast knows that pickup trucks are 'Murica's most popular vehicle by a colossal margin, and there have been plenty of reports about the popularity of luxuriously appointed trucks and SUVs, but compare these figures from TrueCar: 70 percent of Chevrolet Tahoe sales have a transaction price above $50K, and The Bowtie is expected to make $3.9 billion in revenue on 66,945 predicted high-dollar sales; 95.1 percent of E-Class sales break $50K, so the German company will make $4.0 billion on 67,006 predicted sales in that pricing sphere. It's about the only time you'll see the Tahoe ranked right next to Mercedes' bread-and-butter sedan. Ram is ahead of those two with $4.2B coming from $50K-plus sales. The Ford F-Series does almost as much revenue as the next three combined, with an expected $10.8 billion coming from sales of trucks over $50K - more than a quarter of the model's total sales, when a base F-150 can be had for about $26,000. Yes, the Germans make a lot more money on fewer sales, but considering the comparison, the bottom line isn't too troubled by such facts. Weighing like-for-like, the full-size Ford walks it in every category; elsewhere, the Chevrolet Silverado outsells the Ram, but the Ram outsells the Chevy by 6.7 percent above $50K. And for all the flak GMC takes over swapping out grilles, the Sierra also outsells the Chevy in the well-appointed segment, 16.1 percent of sales versus 11 percent – the Professional Grade brand is a huge profit center for The General. You'll find more info in the TrueCar press release below. TrueCar finds pickup trucks far outsell premium brands among top 10 vehicles over $50,000 Ford F-Series pickup sales over $50,000 surpass combined BMW 3, 5, 7 Series luxury car sales SANTA MONICA, Calif. (December 10, 2014) - TrueCar, Inc., the negotiation-free car buying and selling platform, finds mainstream pickup trucks and sport-utility vehicles dominate U.S.